From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 01/26] dm: i2c: Provide an offset length parameter where needed
Date: Tue, 20 Jan 2015 07:28:03 +0100 [thread overview]
Message-ID: <54BDF573.4000307@denx.de> (raw)
In-Reply-To: <1421723575-4532-2-git-send-email-sjg@chromium.org>
Hello Simon,
Am 20.01.2015 04:12, schrieb Simon Glass:
> Rather than assuming that the chip offset length is 1, allow it to be
> provided. This allows chips that don't use the default offset length to
> be used (at present they are only supported by the command line 'i2c'
> command which sets the offset length explicitly).
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Add new patch to provide an offset length parameter where needed
>
> arch/arm/cpu/tegra20-common/pmu.c | 2 +-
> board/avionic-design/common/tamonten-ng.c | 2 +-
> board/nvidia/cardhu/cardhu.c | 4 ++--
> board/nvidia/dalmore/dalmore.c | 4 ++--
> board/nvidia/whistler/whistler.c | 4 ++--
> board/toradex/apalis_t30/apalis_t30.c | 2 +-
> common/cmd_i2c.c | 2 +-
> drivers/i2c/i2c-uclass.c | 16 +++++++++-------
> drivers/i2c/sandbox_i2c.c | 2 +-
> drivers/power/as3722.c | 2 +-
> include/i2c.h | 8 ++++++--
> test/dm/i2c.c | 10 +++++-----
> 12 files changed, 32 insertions(+), 26 deletions(-)
Acked-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2015-01-20 6:28 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-20 3:12 [U-Boot] [PATCH v2 0/26] dm: Add additional bus functionality Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 01/26] dm: i2c: Provide an offset length parameter where needed Simon Glass
2015-01-20 6:28 ` Heiko Schocher [this message]
2015-01-21 10:45 ` Masahiro Yamada
2015-01-21 16:12 ` Simon Glass
2015-01-21 18:34 ` Masahiro YAMADA
2015-01-22 8:03 ` Masahiro Yamada
2015-01-22 15:00 ` Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 02/26] dm: Don't run tests if U-Boot cannot be built Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 03/26] dm: core: Improve comments for uclass_first/next_device() Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 04/26] dm: core: Set device tree node for root device Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 05/26] dm: core: Tidy up error handling in device_bind() Simon Glass
2015-01-22 8:04 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 06/26] dm: core: Allocate platform data when binding a device Simon Glass
2015-01-23 9:20 ` Masahiro Yamada
2015-01-23 15:50 ` Simon Glass
2015-01-24 5:04 ` Masahiro YAMADA
2015-01-24 14:23 ` Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 07/26] dm: core: Allow parents to have platform data for their children Simon Glass
2015-01-22 7:45 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 08/26] dm: core: Allow uclasses to specific the platdata for a device's children Simon Glass
2015-01-22 10:25 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 09/26] dm: core: Add a post_bind method for parents Simon Glass
2015-01-23 12:42 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 10/26] dm: core: Add a function to get a device's uclass ID Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 11/26] dm: core: Add a flag to control sequence numbering Simon Glass
2015-01-22 9:50 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 12/26] dm: core: Allow uclasses to specific the private data for a device's children Simon Glass
2015-01-22 10:25 ` Masahiro Yamada
2015-01-22 14:58 ` Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 13/26] dm: spi: Move the per-child data size to the uclass Simon Glass
2015-01-22 10:30 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 14/26] dm: core: Allow the uclass to set up a device's child after binding Simon Glass
2015-01-22 11:45 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 15/26] dm: sandbox: sf: Tidy up the error handling in sandbox_sf_probe() Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 16/26] dm: core: Allow uclass to set up a device's child before it is probed Simon Glass
2015-01-22 11:45 ` Masahiro Yamada
2015-01-20 3:12 ` [U-Boot] [PATCH v2 17/26] dm: spi: Set up the spi_slave device pointer in child_pre_probe() Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 18/26] dm: spi: Move slave details to child platdata Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 19/26] dm: i2c: " Simon Glass
2015-01-23 12:32 ` Masahiro Yamada
2015-01-23 15:40 ` Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 20/26] dm: tegra: Drop unused COMPAT features for I2C, SPI Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 21/26] dm: exynos: Drop unused COMPAT features for SPI Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 22/26] dm: core: Ignore disabled devices when binding Simon Glass
2015-01-24 4:46 ` Masahiro YAMADA
2015-01-20 3:12 ` [U-Boot] [PATCH v2 23/26] dm: cros_ec: Don't require protocol 3 support Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 24/26] dm: cros_ec: Move cros_ec_i2c over to driver model Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 25/26] dm: cros_ec_spi: Remove old pre-driver-model code Simon Glass
2015-01-20 3:12 ` [U-Boot] [PATCH v2 26/26] dm: Update documentation for new bus features Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BDF573.4000307@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox