[U-Boot] [PATCH 1/2] mtd:mxs:nand calculate ecc strength dynamically

[Peng Fan <B51431@freescale.com>]

Hi Marek,

Since you are familiar with this driver, would you please help review 
this patch?

On 12/19/2014 12:39 PM, Peng Fan wrote:
> Calculate ecc strength according oobsize, but not hardcoded
> which is not aligned with kernel driver
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Signed-off-by: Ye.Li <b37916@freescale.com>
> ---
>   drivers/mtd/nand/mxs_nand.c | 22 ++++------------------
>   1 file changed, 4 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
> index 7a064ab..a45fcf9 100644
> --- a/drivers/mtd/nand/mxs_nand.c
> +++ b/drivers/mtd/nand/mxs_nand.c
> @@ -146,26 +146,12 @@ static uint32_t mxs_nand_aux_status_offset(void)
>   static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
>   						uint32_t page_oob_size)
>   {
> -	if (page_data_size == 2048) {
> -		if (page_oob_size == 64)
> -			return 8;
> +	int ecc_strength;
>   
> -		if (page_oob_size == 112)
> -			return 14;
> -	}
> -
> -	if (page_data_size == 4096) {
> -		if (page_oob_size == 128)
> -			return 8;
> -
> -		if (page_oob_size == 218)
> -			return 16;
> +	ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
> +			/ (13 * mxs_nand_ecc_chunk_cnt(page_data_size));
>   
> -		if (page_oob_size == 224)
> -			return 16;
> -	}
> -
> -	return 0;
> +	return round_down(ecc_strength, 2);
>   }
>   
>   static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
Thanks,
Peng.