From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx master
Date: Thu, 22 Jan 2015 18:49:43 -0600 [thread overview]
Message-ID: <54C19AA7.30206@freescale.com> (raw)
The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:
Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16 10:25:01 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to db4a1767c09a4696792204d1cac33631cb38424e:
board/T1040rdb: Add VSC9953 support for T1040rdb board (2015-01-21 09:23:36 -0600)
----------------------------------------------------------------
Aneesh Bansal (1):
powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure Boot
Chunhe Lan (1):
powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW
Codrin Ciubotariu (11):
net/fm: Fix error when FMAN MAC has no PHY
arch/powerpc: Fix mapping of Freescale SerDes protocols
arch/powerpc: Add SGMII support for the L2 Switch ports
net/fm: Enable FMAN ports if l2switch ports are connected over SGMII
net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
arch/powerpc: Initialize VSC9953 L2 Switch
board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89
board/T1040qds: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs
board/T104xrdb: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs
board/T1040qds: Add VSC9953 support for T1040qds board
board/T1040rdb: Add VSC9953 support for T1040rdb board
Po Liu (1):
powerpc/c29xpcie: Add secure boot support
Ruchika Gupta (1):
powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROL
Shaohui Xie (1):
phylib: add support for aquantia PHYs
Shengzhou Liu (3):
powerpc/t1024: add serdes protocol 0x40 and 0x5f
t1024qds: add missing T1024QDS_defconfig
powerpc/t1024rdb: Add support for T1024RDB-PB
Tudor Laurentiu (1):
b4860: Correct LIODN assignment for PCIe
gaurav rana (2):
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS
powerpc: SECURE BOOT- Add secure boot target for T1042RDB
harninder rai (1):
powerpc/913x: Add config flag for bootdelay
tang yuantian (4):
mpc85xx/t102xrdb: convert deep sleep to generic board interface
mpc85xx/t102xqds: convert deep sleep to generic board interface
mpc85xx/t1040qds: convert deep sleep to generic board interface
mpc85xx: clean up the old deep sleep framework
arch/powerpc/cpu/mpc85xx/b4860_ids.c | 2 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 10 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 73 ++--
arch/powerpc/cpu/mpc85xx/t1024_serdes.c | 2 +
arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 8 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +
arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 15 +
arch/powerpc/include/asm/fsl_secure_boot.h | 2 +
arch/powerpc/include/asm/fsl_serdes.h | 7 +
arch/powerpc/lib/board.c | 21 -
board/freescale/c29xpcie/MAINTAINERS | 2 +
board/freescale/corenet_ds/MAINTAINERS | 1 +
board/freescale/t102xqds/ddr.c | 19 +
board/freescale/t102xqds/t102xqds.c | 23 +-
board/freescale/t102xrdb/cpld.h | 4 +
board/freescale/t102xrdb/ddr.c | 19 +
board/freescale/t102xrdb/eth_t102xrdb.c | 30 +-
board/freescale/t102xrdb/spl.c | 7 +
board/freescale/t102xrdb/t102xrdb.c | 54 ++-
board/freescale/t1040qds/ddr.c | 19 +
board/freescale/t1040qds/eth.c | 93 +++++
board/freescale/t1040qds/t1040qds.c | 23 +-
board/freescale/t104xrdb/MAINTAINERS | 1 +
board/freescale/t104xrdb/eth.c | 59 ++-
board/freescale/t4rdb/eth.c | 2 +-
board/freescale/t4rdb/t4_rcw.cfg | 4 +-
configs/C29XPCIE_NOR_SECBOOT_defconfig | 4 +
configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 4 +
configs/P5040DS_SECURE_BOOT_defconfig | 4 +
configs/T1024QDS_defconfig | 4 +
configs/T1042RDB_SECURE_BOOT_defconfig | 4 +
doc/README.t1040-l2switch | 48 +++
drivers/net/Makefile | 1 +
drivers/net/fm/eth.c | 30 +-
drivers/net/fm/t1040.c | 3 +-
drivers/net/phy/Makefile | 1 +
drivers/net/phy/aquantia.c | 156 ++++++++
drivers/net/phy/phy.c | 3 +
drivers/net/vsc9953.c | 497 ++++++++++++++++++++++++
include/configs/BSC9131RDB.h | 1 +
include/configs/BSC9132QDS.h | 1 +
include/configs/C29XPCIE.h | 2 +
include/configs/T102xQDS.h | 3 +
include/configs/T102xRDB.h | 23 +-
include/configs/T1040QDS.h | 9 +
include/configs/T104xRDB.h | 8 +
include/phy.h | 1 +
include/vsc9953.h | 402 +++++++++++++++++++
48 files changed, 1582 insertions(+), 132 deletions(-)
create mode 100644 arch/powerpc/include/asm/arch-mpc85xx/gpio.h
create mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig
create mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
create mode 100644 configs/P5040DS_SECURE_BOOT_defconfig
create mode 100644 configs/T1024QDS_defconfig
create mode 100644 configs/T1042RDB_SECURE_BOOT_defconfig
create mode 100644 doc/README.t1040-l2switch
create mode 100644 drivers/net/phy/aquantia.c
create mode 100644 drivers/net/vsc9953.c
create mode 100644 include/vsc9953.h
Thanks.
York
next reply other threads:[~2015-01-23 0:49 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 0:49 York Sun [this message]
2015-01-23 21:57 ` [U-Boot] Please pull u-boot-mpc85xx master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-01-24 16:25 York Sun
2019-01-25 15:16 ` Tom Rini
2018-10-30 19:21 York Sun
2018-10-31 14:44 ` Tom Rini
2018-09-28 15:35 York Sun
2018-09-30 2:27 ` Tom Rini
2018-07-31 17:25 York Sun
2018-08-01 15:05 ` Tom Rini
2018-07-31 17:12 York Sun
2018-07-31 17:16 ` York Sun
2017-12-08 16:59 York Sun
2017-12-09 1:35 ` Tom Rini
2017-06-13 17:02 York Sun
2017-06-15 13:01 ` Tom Rini
2017-02-01 16:19 york sun
2017-02-02 3:20 ` Tom Rini
2017-01-25 5:26 york sun
2017-01-26 3:00 ` Tom Rini
2016-12-20 17:15 york sun
2016-12-22 2:30 ` Tom Rini
2016-12-04 17:02 york sun
2016-12-04 23:00 ` Tom Rini
2016-11-29 22:18 york sun
2016-11-30 14:12 ` Tom Rini
2016-10-15 17:02 york sun
2016-10-18 0:08 ` Tom Rini
2016-07-22 0:17 york sun
2016-07-23 0:09 ` Tom Rini
2016-07-25 18:52 ` Scott Wood
2016-07-25 19:02 ` york sun
2016-06-04 16:03 York Sun
2016-06-06 11:16 ` Tom Rini
2016-05-25 3:37 York Sun
2016-05-26 15:49 ` Tom Rini
2016-04-08 22:45 York Sun
2016-04-11 15:00 ` Tom Rini
2016-02-26 18:51 york sun
2016-02-26 19:09 ` Tom Rini
2016-01-25 20:49 york sun
2016-01-26 22:44 ` Tom Rini
[not found] <568BFBF0.3040605@freescale.com>
2016-01-05 18:21 ` York Sun
[not found] <563A9399.80500@freescale.com>
2015-11-04 23:45 ` Tom Rini
2015-11-02 21:06 York Sun
2015-11-02 23:17 ` Tom Rini
2015-09-02 15:26 York Sun
2015-09-02 21:58 ` Tom Rini
2015-07-31 16:00 York Sun
2015-08-01 14:47 ` Tom Rini
2015-05-05 16:55 York Sun
2015-05-05 23:59 ` Tom Rini
2015-04-20 21:05 York Sun
2015-04-22 15:52 ` Tom Rini
2015-03-05 20:20 York Sun
2015-03-06 15:43 ` Tom Rini
2014-12-16 17:24 York Sun
2014-12-17 0:45 ` Tom Rini
2014-12-05 16:10 York Sun
2014-12-08 21:41 ` Tom Rini
2014-07-23 20:19 York Sun
2014-07-28 19:03 ` Tom Rini
2014-06-05 21:30 York Sun
2014-06-05 22:50 ` Tom Rini
2014-05-16 22:12 York Sun
2014-05-19 12:47 ` Tom Rini
2014-04-23 22:45 York Sun
2014-04-25 19:44 ` Tom Rini
2014-02-03 17:04 York Sun
2014-02-04 22:05 ` Tom Rini
2014-01-03 23:57 York Sun
2014-01-07 17:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C19AA7.30206@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox