[U-Boot] [PATCH 2/5] Enable booting of mx28 without battery

[Graeme Russ <gruss@tss-engineering.com>]

Hi Fabio,

On 23/01/15 14:01, Fabio Estevam wrote:
> On Fri, Jan 23, 2015 at 12:58 AM, Graeme Russ <gruss@tss-engineering.com> wrote:
>>
>> I've taken a look at it, but decided to leave this patch as-is. Here is what
>> I wrote on the Freescale forum:
>
> Still curious: does the updated patch from Damien allow your system to
> boot or not?

It is on today's todo list

>
>> ~~~~
>> I'm going to keep my U-Boot patch mostly as-is for a few reasons:
>> - The patch disables battery voltage measurement when there is no battery
>> - The patch disables all code paths relating to booting from battery
>> - The power block configuration is based primarily on the Fressscale
>> bootlets which I think should be retained unless we can come up with some
>> pretty clear and convincing arguments as to why an alternative approach is
>> better
>
> ,but my understanding is that the original patch does not work on
> Damien's board as it gives DDR errors.


I thought the DDR errors were fixed with Damien's DDR patch. Damien, can 
you please confirm?

Regards,


Graeme