From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 23 Jan 2015 14:01:25 +0100 Subject: [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery In-Reply-To: <54C2021C.9010604@tss-engineering.com> References: <1421841318-3014-1-git-send-email-gruss@tss-engineering.com> <1421841318-3014-3-git-send-email-gruss@tss-engineering.com> <54C1B8C8.7020106@tss-engineering.com> <54C1BFA1.80607@tss-engineering.com> <54C1CAB7.9080804@tss-engineering.com> <54C2021C.9010604@tss-engineering.com> Message-ID: <54C24625.4030605@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Graeme, On 23/01/2015 09:11, Graeme Russ wrote: > Hi Damien, > > On 23/01/15 19:03, Damien GOTFROI wrote: >> Hi, >> >> I confirm, my first patch for spl_power_init.c generated DDR errors. >> >> And my new (small) patch for spl_power_init.c fixes these errors, it >> is not my DDR patch. > > An I can confirm that your smaller patch allows me to boot the G2C1 > board. I'll just implement the smaller patch - we can tackle the rest later > > Thanks for your very helpful experimentation > Thanks all for digging on this issue ! Graeme, if patch is coming from Damien, it should have also his Signed-off-by (Damien, is it ok for you ?). Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================