[U-Boot] [PATCH v2 1/2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one

[U-Boot] [PATCH v2 1/2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one

[Tang Yuantian]

Defining variable gic_dist_addr as a globe one prevents some
functions, which use it, from being used before relocation
which is the case in the deep sleep resume process on Freescale
SoC platforms.
Besides, we can always get the GIC base address by calling
get_gicd_base_address() without referring gic_dist_addr.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
v2:
	- change variable gic_dist_addr back as local

 arch/arm/cpu/armv7/virt-v7.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 651ca40..b69fd37 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/secure.h>
 
-unsigned long gic_dist_addr;
-
 static unsigned int read_id_pfr1(void)
 {
 	unsigned int reg;
@@ -68,6 +66,12 @@ static void kick_secondary_cpus_gic(unsigned long gicdaddr)
 
 void __weak smp_kick_all_cpus(void)
 {
+	unsigned long gic_dist_addr;
+
+	gic_dist_addr = get_gicd_base_address();
+	if (gic_dist_addr == -1)
+		return;
+
 	kick_secondary_cpus_gic(gic_dist_addr);
 }
 
@@ -75,6 +79,7 @@ int armv7_init_nonsec(void)
 {
 	unsigned int reg;
 	unsigned itlinesnr, i;
+	unsigned long gic_dist_addr;
 
 	/* check whether the CPU supports the security extensions */
 	reg = read_id_pfr1();
-- 
2.1.0.27.g96db324

[U-Boot] [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support

[Tang Yuantian]

Add deep sleep support on Freescale LS1021QDS platform.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
based on: u-boot-fsl-qoriq master.
depends on patch: http://patchwork.ozlabs.org/patch/420999/
which is applied to u-boot-mpc85xx master, awaiting upstream.
v2:
	- added sd boot deep sleep support

 arch/arm/cpu/armv7/ls102xa/fdt.c        | 19 +++++++++++++++++++
 board/freescale/ls1021aqds/ddr.c        | 17 +++++++++++++++++
 board/freescale/ls1021aqds/ls1021aqds.c | 26 ++++++++++++++++++++++++++
 include/configs/ls1021aqds.h            |  8 +++++++-
 4 files changed, 69 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 989780d..4f226e9 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -133,4 +133,23 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
 			       "clock-frequency", busclk / 2, 1);
+
+#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
+#define UBOOT_HEAD_LEN	0x1000
+	/*
+	 * Reserved memory in SD boot deep sleep case.
+	 * Second stage uboot binary and malloc space should be reserved.
+	 * If the memory they occupied has not been reserved, then this
+	 * space would be used by kernel and overwritten in uboot when
+	 * deep sleep resume, which cause deep sleep failed.
+	 * Since second uboot binary has a head, that space need to be
+	 * reserved either(assuming its size is less than 0x1000).
+	 */
+	off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+			CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+			UBOOT_HEAD_LEN);
+	if (off < 0)
+		printf("Failed to reserve memory for SD boot deep sleep: %s\n",
+		       fdt_strerror(off));
+#endif
 }
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index a539ff9..6435bf9 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -149,6 +150,17 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 }
 #endif
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -159,6 +171,11 @@ phys_size_t initdram(int board_type)
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
 
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index f08e54f..97da47d 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -20,6 +20,7 @@
 #include <fsl_sec.h>
 #include <spl.h>
 
+#include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
 #ifdef CONFIG_U_QE
@@ -195,6 +196,11 @@ int board_early_init_f(void)
 	 * allow barrier transaction to DDR again */
 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	return 0;
 }
 
@@ -231,6 +237,11 @@ void board_init_f(ulong dummy)
 
 	get_clocks();
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	preloader_console_init();
 
 #ifdef CONFIG_SPL_I2C_SUPPORT
@@ -503,6 +514,21 @@ int board_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_sleep_prepare(void)
+{
+	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+
+	/* Set CCI-400 control override register to
+	 * enable barrier transaction */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
+}
+#endif
+
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8dc04f2..4b434ad 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -19,6 +19,11 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
+#define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
 /*
  * Size of malloc() pool
  */
@@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO		0x1c000
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 
-#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
+		CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-- 
2.1.0.27.g96db324

[U-Boot] [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support

[Yuantian Tang]

Hello York,

This patch's dependent patch is merged into mainline. So there is no dependency for this patch anymore.

Thanks,
Yuantian

> -----Original Message-----
> From: Tang Yuantian [mailto:Yuantian.Tang at freescale.com]
> Sent: Wednesday, December 17, 2014 12:58 PM
> To: albert.u.boot at aribaud.net; Sun York-R58495
> Cc: u-boot at lists.denx.de; Tang Yuantian-B29983
> Subject: [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support
> 
> Add deep sleep support on Freescale LS1021QDS platform.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> ---
> based on: u-boot-fsl-qoriq master.
> depends on patch: http://patchwork.ozlabs.org/patch/420999/
> which is applied to u-boot-mpc85xx master, awaiting upstream.
> v2:
> 	- added sd boot deep sleep support
> 
>  arch/arm/cpu/armv7/ls102xa/fdt.c        | 19 +++++++++++++++++++
>  board/freescale/ls1021aqds/ddr.c        | 17 +++++++++++++++++
>  board/freescale/ls1021aqds/ls1021aqds.c | 26 ++++++++++++++++++++++++++
>  include/configs/ls1021aqds.h            |  8 +++++++-
>  4 files changed, 69 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c
> b/arch/arm/cpu/armv7/ls102xa/fdt.c
> index 989780d..4f226e9 100644
> --- a/arch/arm/cpu/armv7/ls102xa/fdt.c
> +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
> @@ -133,4 +133,23 @@ void ft_cpu_setup(void *blob, bd_t *bd)
> 
>  	do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
>  			       "clock-frequency", busclk / 2, 1);
> +
> +#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
> +#define UBOOT_HEAD_LEN	0x1000
> +	/*
> +	 * Reserved memory in SD boot deep sleep case.
> +	 * Second stage uboot binary and malloc space should be reserved.
> +	 * If the memory they occupied has not been reserved, then this
> +	 * space would be used by kernel and overwritten in uboot when
> +	 * deep sleep resume, which cause deep sleep failed.
> +	 * Since second uboot binary has a head, that space need to be
> +	 * reserved either(assuming its size is less than 0x1000).
> +	 */
> +	off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE -
> UBOOT_HEAD_LEN,
> +			CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
> +			UBOOT_HEAD_LEN);
> +	if (off < 0)
> +		printf("Failed to reserve memory for SD boot deep sleep: %s\n",
> +		       fdt_strerror(off));
> +#endif
>  }
> diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
> index a539ff9..6435bf9 100644
> --- a/board/freescale/ls1021aqds/ddr.c
> +++ b/board/freescale/ls1021aqds/ddr.c
> @@ -7,6 +7,7 @@
>  #include <common.h>
>  #include <fsl_ddr_sdram.h>
>  #include <fsl_ddr_dimm_params.h>
> +#include <asm/io.h>
>  #include "ddr.h"
> 
>  DECLARE_GLOBAL_DATA_PTR;
> @@ -149,6 +150,17 @@ int fsl_ddr_get_dimm_params(dimm_params_t
> *pdimm,  }  #endif
> 
> +#if defined(CONFIG_DEEP_SLEEP)
> +void board_mem_sleep_setup(void)
> +{
> +	void __iomem *qixis_base = (void *)QIXIS_BASE;
> +
> +	/* does not provide HW signals for power management */
> +	clrbits_8(qixis_base + 0x21, 0x2);
> +	udelay(1);
> +}
> +#endif
> +
>  phys_size_t initdram(int board_type)
>  {
>  	phys_size_t dram_size;
> @@ -159,6 +171,11 @@ phys_size_t initdram(int board_type)  #else
>  	dram_size =  fsl_ddr_sdram_size();
>  #endif
> +
> +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
> +	fsl_dp_resume();
> +#endif
> +
>  	return dram_size;
>  }
> 
> diff --git a/board/freescale/ls1021aqds/ls1021aqds.c
> b/board/freescale/ls1021aqds/ls1021aqds.c
> index f08e54f..97da47d 100644
> --- a/board/freescale/ls1021aqds/ls1021aqds.c
> +++ b/board/freescale/ls1021aqds/ls1021aqds.c
> @@ -20,6 +20,7 @@
>  #include <fsl_sec.h>
>  #include <spl.h>
> 
> +#include "../common/sleep.h"
>  #include "../common/qixis.h"
>  #include "ls1021aqds_qixis.h"
>  #ifdef CONFIG_U_QE
> @@ -195,6 +196,11 @@ int board_early_init_f(void)
>  	 * allow barrier transaction to DDR again */
>  	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
> 
> +#if defined(CONFIG_DEEP_SLEEP)
> +	if (is_warm_boot())
> +		fsl_dp_disable_console();
> +#endif
> +
>  	return 0;
>  }
> 
> @@ -231,6 +237,11 @@ void board_init_f(ulong dummy)
> 
>  	get_clocks();
> 
> +#if defined(CONFIG_DEEP_SLEEP)
> +	if (is_warm_boot())
> +		fsl_dp_disable_console();
> +#endif
> +
>  	preloader_console_init();
> 
>  #ifdef CONFIG_SPL_I2C_SUPPORT
> @@ -503,6 +514,21 @@ int board_init(void)
>  	return 0;
>  }
> 
> +#if defined(CONFIG_DEEP_SLEEP)
> +void board_sleep_prepare(void)
> +{
> +	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
> +
> +	/* Set CCI-400 control override register to
> +	 * enable barrier transaction */
> +	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
> +
> +#ifdef CONFIG_LS102XA_NS_ACCESS
> +	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev)); #endif } #endif
> +
>  int ft_board_setup(void *blob, bd_t *bd)  {
>  	ft_cpu_setup(blob, bd);
> diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index
> 8dc04f2..4b434ad 100644
> --- a/include/configs/ls1021aqds.h
> +++ b/include/configs/ls1021aqds.h
> @@ -19,6 +19,11 @@
>  #define CONFIG_SKIP_LOWLEVEL_INIT
>  #define CONFIG_BOARD_EARLY_INIT_F
> 
> +#define CONFIG_DEEP_SLEEP
> +#if defined(CONFIG_DEEP_SLEEP)
> +#define CONFIG_SILENT_CONSOLE
> +#endif
> +
>  /*
>   * Size of malloc() pool
>   */
> @@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void);
>  #define CONFIG_SPL_PAD_TO		0x1c000
>  #define CONFIG_SYS_TEXT_BASE		0x82000000
> 
> -#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
> +#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
> +		CONFIG_SYS_MONITOR_LEN)
>  #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
>  #define CONFIG_SPL_BSS_START_ADDR	0x80100000
>  #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
> --
> 2.1.0.27.g96db324

[U-Boot] [PATCH v2 2/2] fsl/ls1021qds: Add deep sleep support

[York Sun]

On 12/16/2014 10:58 PM, Tang Yuantian wrote:
> Add deep sleep support on Freescale LS1021QDS platform.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> ---
> based on: u-boot-fsl-qoriq master.
> depends on patch: http://patchwork.ozlabs.org/patch/420999/
> which is applied to u-boot-mpc85xx master, awaiting upstream.
> v2:
> 	- added sd boot deep sleep support
> 


Applied to u-boot-fsl-qoriq master branch, awaiting upstream.

York

[U-Boot] [PATCH v2 1/2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one

[York Sun]

Albert,

On 12/16/2014 08:58 PM, Tang Yuantian wrote:
> Defining variable gic_dist_addr as a globe one prevents some
> functions, which use it, from being used before relocation
> which is the case in the deep sleep resume process on Freescale
> SoC platforms.
> Besides, we can always get the GIC base address by calling
> get_gicd_base_address() without referring gic_dist_addr.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> ---
> v2:
> 	- change variable gic_dist_addr back as local
> 
>  arch/arm/cpu/armv7/virt-v7.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
> index 651ca40..b69fd37 100644
> --- a/arch/arm/cpu/armv7/virt-v7.c
> +++ b/arch/arm/cpu/armv7/virt-v7.c
> @@ -15,8 +15,6 @@
>  #include <asm/io.h>
>  #include <asm/secure.h>
>  
> -unsigned long gic_dist_addr;
> -
>  static unsigned int read_id_pfr1(void)
>  {
>  	unsigned int reg;
> @@ -68,6 +66,12 @@ static void kick_secondary_cpus_gic(unsigned long gicdaddr)
>  
>  void __weak smp_kick_all_cpus(void)
>  {
> +	unsigned long gic_dist_addr;
> +
> +	gic_dist_addr = get_gicd_base_address();
> +	if (gic_dist_addr == -1)
> +		return;
> +
>  	kick_secondary_cpus_gic(gic_dist_addr);
>  }
>  
> @@ -75,6 +79,7 @@ int armv7_init_nonsec(void)
>  {
>  	unsigned int reg;
>  	unsigned itlinesnr, i;
> +	unsigned long gic_dist_addr;
>  
>  	/* check whether the CPU supports the security extensions */
>  	reg = read_id_pfr1();
> 

I think this patch is OK. If you don't have objection, I will bring it in.

York

[U-Boot] [PATCH v2 1/2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one

[York Sun]

On 12/16/2014 10:58 PM, Tang Yuantian wrote:
> Defining variable gic_dist_addr as a globe one prevents some
> functions, which use it, from being used before relocation
> which is the case in the deep sleep resume process on Freescale
> SoC platforms.
> Besides, we can always get the GIC base address by calling
> get_gicd_base_address() without referring gic_dist_addr.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> ---
> v2:
> 	- change variable gic_dist_addr back as local
> 

Applied to u-boot-fsl-qoriq master branch, awaiting upstream.

York