From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrea Scian <rnd4@dave-tech.it>
Date: Mon, 26 Jan 2015 09:49:29 +0100
Subject: [U-Boot] Dallas 1-wire support in u-boot
Message-ID: <54C5FF99.6060201@dave-tech.it>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear u-boot developers,

I'm looking for support of 1-wire protocol in this bootloader, without 
luck up until now

I already search list archive with gmane and found only this old reference

http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/117292

I also found some board implementation, not as a generic driver but as 
simple routines inside board file to read a thermal chip (unfortunately 
I've missed the reference now).

Is there any staging patch or RFC for this protocol support in our 
beloved embedded bootloader?

Currently I'm implementing this feature into an old 2013.10 version but 
I think it should be easy to adapt this kind of drivers between 
different u-boot releases.

Best Regards and TIA,

-- 

Andrea SCIAN

DAVE Embedded Systems