[U-Boot] [PATCH] sunxi: Add Linksprite_pcDuino3_Nano board / defconfig

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 25-01-15 16:24, Adam Sampson wrote:
> This is a low-cost Allwinner A20 board with Arduino-style GPIO headers;
> it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro
> USB socket for OTG and another for power in, HDMI, SATA, 5V power for
> SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a
> MIPI camera connector.
>
> For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano
>
> Signed-off-by: Adam Sampson <ats@offog.org>

Thanks, I've queued this up for merging in u-boot-sunxi/next

Regards,

Hans


> ---
>   board/sunxi/MAINTAINERS                    |    5 +++++
>   configs/Linksprite_pcDuino3_Nano_defconfig |   11 +++++++++++
>   2 files changed, 16 insertions(+)
>   create mode 100644 configs/Linksprite_pcDuino3_Nano_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 743e7f5..479d147 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -100,3 +100,8 @@ MELE M5 BOARD
>   M:	Ian Campbell <ijc@hellion.org.uk>
>   S:	Maintained
>   F:	configs/Mele_M5_defconfig
> +
> +LINKSPRITE-PCDUINO3-NANO BOARD
> +M:	Adam Sampson <ats@offog.org>
> +S:	Maintained
> +F:	configs/Linksprite_pcDuino3_Nano_defconfig
> diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
> new file mode 100644
> index 0000000..22435eb
> --- /dev/null
> +++ b/configs/Linksprite_pcDuino3_Nano_defconfig
> @@ -0,0 +1,11 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
> +CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb"
> +CONFIG_USB1_VBUS_PIN="PH11"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_ARCH_SUNXI=y
> ++S:CONFIG_MACH_SUN7I=y
> ++S:CONFIG_TARGET_PCDUINO3_NANO=y
> ++S:CONFIG_DRAM_CLK=408
> ++S:CONFIG_DRAM_ZQ=122
> ++S:CONFIG_DRAM_EMR1=4
>