From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 08/12] i2c: s3c24x0: reduce transmission status timeout
Date: Tue, 27 Jan 2015 16:44:45 +0100 [thread overview]
Message-ID: <54C7B26D.5040708@samsung.com> (raw)
In-Reply-To: <CAPnjgZ1X4YFj=DvkgfTenBZPbp0djVJ2q5QmgzN96aSaqwavig@mail.gmail.com>
Hello,
On 01/27/2015 04:38 PM, Simon Glass wrote:
> Hi,
>
> On 27 January 2015 at 05:36, Przemyslaw Marczak <p.marczak@samsung.com> wrote:
>> If no device is connected to I2C bus, the i2c probe command
>> can take a lot of time for probe each address. This commit
>> reduces the busy timeout to 10ms for standard and high speed
>> modes. This doesn't break the transmission an also allow for
>> properly probe the devices.
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>
> Tested-by: Simon Glass <sjg@chromium.org>
>
> This patch looks OK but I'd like to get other comments if possible.
>
[cut]
Ok, that's fine. I tested this on Trats2 and Odroid XU3 and it works fine.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
next prev parent reply other threads:[~2015-01-27 15:44 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-08 11:28 [U-Boot] [PATCH 00/18] Exynos: move i2c driver to dm api Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 01/18] arndale: config: disable max77686 support Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 02/18] exynos5250: config: disable max77686 driver Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-08 11:33 ` [U-Boot] [PATCH 03/18] smdk5250: config: enable max77686 driver support Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-08 11:33 ` [U-Boot] [PATCH 04/18] exynos4: dts: add missing i2c properties Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-08 11:33 ` [U-Boot] [PATCH 05/18] arndale: dts: add missing i2c aliases Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-08 11:33 ` [U-Boot] [PATCH 06/18] exynos5: pinmux: check flag for i2c config Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-08 11:33 ` [U-Boot] [PATCH 07/18] dm: i2c: s3c24x0: adjust to dm-i2c api Przemyslaw Marczak
2015-01-09 6:31 ` Heiko Schocher
2015-01-09 8:57 ` Przemyslaw Marczak
2015-01-20 3:18 ` Simon Glass
2015-01-23 15:15 ` Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 08/18] exynos5: config: prepare for dm i2c support Przemyslaw Marczak
2015-01-08 14:11 ` Minkyu Kang
2015-01-09 6:37 ` Heiko Schocher
2015-01-09 20:51 ` Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 09/18] exynos5250: config: temporary disable sound for dm i2c Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 10/18] arndale: config: temporary disable pmic " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 11/18] exynos5-dt: " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 12/18] snow: config: temporary disable cros ec i2c " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 13/18] smdk5250: config: temporary disable pmic " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 14/18] smdk5420: board: fix build warning for testing " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 15/18] peach-pi: config: temporary disable video parade for " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 16/18] peach-pit: " Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 17/18] trats2: board: cleanup power init code Przemyslaw Marczak
2015-01-08 11:33 ` [U-Boot] [PATCH 18/18] trats2: config: disable i2c peripherals if testing dm i2c Przemyslaw Marczak
2015-01-08 14:11 ` Minkyu Kang
2015-01-09 8:49 ` Przemyslaw Marczak
2015-01-27 3:13 ` [U-Boot] [PATCH 01/18] arndale: config: disable max77686 support Simon Glass
2015-01-29 17:33 ` Simon Glass
2015-01-08 12:13 ` [U-Boot] [PATCH 00/18] Exynos: move i2c driver to dm api Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 00/10] exynos: enable dm i2c Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 01/10] arndale: config: disable max77686 support Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 02/10] exynos5250: config: disable max77686 driver Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 03/10] smdk5250: config: enable max77686 driver support Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 04/10] exynos4: dts: add missing i2c properties Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 05/10] arndale: dts: add missing i2c aliases Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 06/10] exynos5: pinmux: check flag for i2c config Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 07/10] dm: i2c: s3c24x0: adjust to dm-i2c api Przemyslaw Marczak
2015-01-27 3:13 ` Simon Glass
2015-01-27 8:01 ` Przemyslaw Marczak
2015-01-26 15:21 ` [U-Boot] [PATCH v2 08/10] odroid u3: dts: add missing i2c aliases Przemyslaw Marczak
2015-01-27 3:14 ` Simon Glass
2015-01-26 15:21 ` [U-Boot] [PATCH v2 09/10] odroid u3: enable dm i2c support Przemyslaw Marczak
2015-01-27 3:14 ` Simon Glass
2015-01-26 15:21 ` [U-Boot] [PATCH v2 10/10] exynos5: enable dm i2c Przemyslaw Marczak
2015-01-27 3:14 ` Simon Glass
2015-01-26 15:32 ` [U-Boot] [PATCH v2 00/10] exynos: " Przemyslaw Marczak
2015-01-27 12:36 ` [U-Boot] [PATCH v3 00/12] " Przemyslaw Marczak
2015-01-27 12:36 ` [U-Boot] [PATCH v3 01/12] dm: i2c-uclass-compat: fix missed argument Przemyslaw Marczak
2015-01-27 15:38 ` Simon Glass
2015-01-29 17:32 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 02/12] arndale: config: disable max77686 support Przemyslaw Marczak
2015-01-27 12:36 ` [U-Boot] [PATCH v3 03/12] exynos5250: config: disable max77686 driver Przemyslaw Marczak
2015-01-29 17:33 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 04/12] smdk5250: config: enable max77686 driver support Przemyslaw Marczak
2015-01-29 17:33 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 05/12] exynos4: dts: add missing i2c properties Przemyslaw Marczak
2015-01-29 17:33 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 06/12] arndale: dts: add missing i2c aliases Przemyslaw Marczak
2015-01-29 17:34 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 07/12] exynos5: pinmux: check flag for i2c config Przemyslaw Marczak
2015-01-27 15:38 ` Simon Glass
2015-01-29 17:34 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 08/12] i2c: s3c24x0: reduce transmission status timeout Przemyslaw Marczak
2015-01-27 15:38 ` Simon Glass
2015-01-27 15:44 ` Przemyslaw Marczak [this message]
2015-02-06 20:48 ` Simon Glass
2015-02-06 21:47 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 09/12] dm: i2c: s3c24x0: adjust to dm-i2c api Przemyslaw Marczak
2015-01-27 15:38 ` Simon Glass
2015-01-29 17:34 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 10/12] odroid u3: dts: add missing i2c aliases Przemyslaw Marczak
2015-01-29 17:34 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 11/12] odroid u3: enable dm i2c support Przemyslaw Marczak
2015-01-29 17:34 ` Simon Glass
2015-01-27 12:36 ` [U-Boot] [PATCH v3 12/12] exynos5: enable dm i2c Przemyslaw Marczak
2015-01-29 17:35 ` Simon Glass
2015-01-27 12:40 ` [U-Boot] [PATCH v3 00/12] exynos: " Przemyslaw Marczak
2015-01-27 15:38 ` Simon Glass
2015-01-29 0:00 ` Simon Glass
2015-01-29 1:58 ` Minkyu Kang
2015-01-29 2:02 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C7B26D.5040708@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox