[U-Boot] [PATCH 06/12] pmic:pfuze add macro for setting voltage

[Stefano Babic <sbabic@denx.de>]

On 09/01/2015 09:59, Peng Fan wrote:
> "#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)"
> This macro is for configuring SW1A/B/C Output Voltage easily.
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
>  include/power/pfuze100_pmic.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
> index 7474afb..d304658 100644
> --- a/include/power/pfuze100_pmic.h
> +++ b/include/power/pfuze100_pmic.h
> @@ -61,6 +61,8 @@ enum {
>   * Buck Regulators
>   */
>  
> +#define PFUZE100_SW1ABC_SETP(x)	((x - 3000) / 250)
> +
>  /* SW1A/B/C Output Voltage Configuration */
>  #define SW1x_0_300V 0
>  #define SW1x_0_325V 1
> 

To inform you: patches 1-3 must be rebased and reworked, mainly due to
pmic_mode_init() (you have postpone V2 after discussion about
ldo-bypass). I start applying the 5-6, that contain only new defines.

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================