[U-Boot] [PATCH v5 2/3] pmic:pfuze implement pmic_mode_init

[Peng Fan <B51431@freescale.com>]

Hi, Stefano

On 1/30/2015 1:48 AM, Stefano Babic wrote:
> On 27/01/2015 03:14, Peng Fan wrote:
>> This patch is to implement pmic_mode_init function, and add prototype
>> in header file.
>>
>> This function is to set switching mode for pmic buck regulators to
>> improve system efficiency.
>>
>> Mode:
>> OFF: The regulator is switched off and the output voltage is discharged.
>> PFM: In this mode, the regulator is always in PFM mode, which
>>       is useful at light loads for optimized efficiency.
>> PWM: In this mode, the regulator is always in PWM mode operation
>>       regardless of load conditions.
>> APS: In this mode, the regulator moves automatically between
>>       pulse skipping mode and PWM mode depending on load conditions.
>>
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
>> ---
> Applied to u-boot-imx, thanks !
I did not see this patch applied to u-boot-imx, I saw only patch 1/3 is 
applied. Do you miss this one?
>
> Best regards,
> Stefano Babic
>
>
>
Regards,
Peng.