From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Wed, 11 Feb 2015 09:59:29 +0800 Subject: [U-Boot] [PATCH v5 2/3] pmic:pfuze implement pmic_mode_init In-Reply-To: <54CA7288.3020904@denx.de> References: <1422324844-1563-1-git-send-email-Peng.Fan@freescale.com> <1422324844-1563-3-git-send-email-Peng.Fan@freescale.com> <54CA7288.3020904@denx.de> Message-ID: <54DAB781.1090504@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Stefano On 1/30/2015 1:48 AM, Stefano Babic wrote: > On 27/01/2015 03:14, Peng Fan wrote: >> This patch is to implement pmic_mode_init function, and add prototype >> in header file. >> >> This function is to set switching mode for pmic buck regulators to >> improve system efficiency. >> >> Mode: >> OFF: The regulator is switched off and the output voltage is discharged. >> PFM: In this mode, the regulator is always in PFM mode, which >> is useful at light loads for optimized efficiency. >> PWM: In this mode, the regulator is always in PWM mode operation >> regardless of load conditions. >> APS: In this mode, the regulator moves automatically between >> pulse skipping mode and PWM mode depending on load conditions. >> >> Signed-off-by: Peng Fan >> Acked-by: Przemyslaw Marczak >> --- > Applied to u-boot-imx, thanks ! I did not see this patch applied to u-boot-imx, I saw only patch 1/3 is applied. Do you miss this one? > > Best regards, > Stefano Babic > > > Regards, Peng.