[U-Boot] [PATCH 06/12] pmic:pfuze add macro for setting voltage

[Peng Fan <B51431@freescale.com>]

Hi, Stefano

On 2/10/2015 7:54 PM, Stefano Babic wrote:
> On 09/01/2015 09:59, Peng Fan wrote:
>> "#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)"
>> This macro is for configuring SW1A/B/C Output Voltage easily.
>>
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> ---
>>   include/power/pfuze100_pmic.h | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
>> index 7474afb..d304658 100644
>> --- a/include/power/pfuze100_pmic.h
>> +++ b/include/power/pfuze100_pmic.h
>> @@ -61,6 +61,8 @@ enum {
>>    * Buck Regulators
>>    */
>>   
>> +#define PFUZE100_SW1ABC_SETP(x)	((x - 3000) / 250)
>> +
>>   /* SW1A/B/C Output Voltage Configuration */
>>   #define SW1x_0_300V 0
>>   #define SW1x_0_325V 1
>>
> To inform you: patches 1-3 must be rebased and reworked, mainly due to
> pmic_mode_init() (you have postpone V2 after discussion about
> ldo-bypass). I start applying the 5-6, that contain only new defines.
I'll rebase patches 1-3 and make the three patches a single v2 patch set.
>
> Applied to u-boot-imx, thanks !
>
> Best regards,
> Stefano Babic
>
Thanks,
Peng.