public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/5] nand: Add verification functions
Date: Wed, 11 Feb 2015 07:45:17 +0100	[thread overview]
Message-ID: <54DAFA7D.5030505@denx.de> (raw)
In-Reply-To: <1422986296-26086-1-git-send-email-ptyser@xes-inc.com>

Hello Peter,

Am 03.02.2015 18:58, schrieb Peter Tyser:
> Add nand_verify() and nand_verify_page_oob().  nand_verify() verifies
> NAND contents against an arbitrarily sized buffer using ECC while
> nand_verify_page_oob() verifies a NAND page's contents and OOB.
>
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
>
>   drivers/mtd/nand/nand_util.c | 97 +++++++++++++++++++++++++++++++++++++++++++-
>   include/nand.h               |  4 ++
>   2 files changed, 100 insertions(+), 1 deletion(-)

Tested on the am335x based dxr2 board with writing a ubifs image
into a nand mtd partition.

Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
> index afdd160..f487756 100644
> --- a/drivers/mtd/nand/nand_util.c
> +++ b/drivers/mtd/nand/nand_util.c
> @@ -464,6 +464,87 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
>   #endif
>
>   /**
> + * nand_verify_page_oob:
> + *
> + * Verify a page of NAND flash, including the OOB.
> + * Reads page of NAND and verifies the contents and OOB against the
> + * values in ops.
> + *
> + * @param nand		NAND device
> + * @param ops		MTD operations, including data to verify
> + * @param ofs		offset in flash
> + * @return		0 in case of success
> + */
> +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs)
> +{
> +	int rval;
> +	struct mtd_oob_ops vops;
> +	size_t verlen = nand->writesize + nand->oobsize;
> +
> +	memcpy(&vops, ops, sizeof(vops));
> +
> +	vops.datbuf = malloc(verlen);
> +
> +	if (!vops.datbuf)
> +		return -ENOMEM;
> +
> +	vops.oobbuf = vops.datbuf + nand->writesize;
> +
> +	rval = mtd_read_oob(nand, ofs, &vops);
> +	if (!rval)
> +		rval = memcmp(ops->datbuf, vops.datbuf, vops.len);
> +	if (!rval)
> +		rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen);
> +
> +	free(vops.datbuf);
> +
> +	return rval ? -EIO : 0;
> +}
> +
> +/**
> + * nand_verify:
> + *
> + * Verify a region of NAND flash.
> + * Reads NAND in page-sized chunks and verifies the contents against
> + * the contents of a buffer.  The offset into the NAND must be
> + * page-aligned, and the function doesn't handle skipping bad blocks.
> + *
> + * @param nand		NAND device
> + * @param ofs		offset in flash
> + * @param len		buffer length
> + * @param buf		buffer to read from
> + * @return		0 in case of success
> + */
> +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf)
> +{
> +	int rval = 0;
> +	size_t verofs;
> +	size_t verlen = nand->writesize;
> +	uint8_t *verbuf = malloc(verlen);
> +
> +	if (!verbuf)
> +		return -ENOMEM;
> +
> +	/* Read the NAND back in page-size groups to limit malloc size */
> +	for (verofs = ofs; verofs < ofs + len;
> +	     verofs += verlen, buf += verlen) {
> +		verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs));
> +		rval = nand_read(nand, verofs, &verlen, verbuf);
> +		if (!rval || (rval == -EUCLEAN))
> +			rval = memcmp(buf, verbuf, verlen);
> +
> +		if (rval)
> +			break;
> +	}
> +
> +	free(verbuf);
> +
> +	return rval ? -EIO : 0;
> +}
> +
> +
> +
> +/**
>    * nand_write_skip_bad:
>    *
>    * Write image to NAND flash.
> @@ -501,7 +582,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>
>   #ifdef CONFIG_CMD_NAND_YAFFS
>   	if (flags & WITH_YAFFS_OOB) {
> -		if (flags & ~WITH_YAFFS_OOB)
> +		if (flags & (~WITH_YAFFS_OOB & ~WITH_WR_VERIFY))
>   			return -EINVAL;
>
>   		int pages;
> @@ -554,6 +635,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>
>   	if (!need_skip && !(flags & WITH_DROP_FFS)) {
>   		rval = nand_write(nand, offset, length, buffer);
> +
> +		if ((flags & WITH_WR_VERIFY) && !rval)
> +			rval = nand_verify(nand, offset, *length, buffer);
> +
>   		if (rval == 0)
>   			return 0;
>
> @@ -601,6 +686,11 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>   				ops.oobbuf = ops.datbuf + pagesize;
>
>   				rval = mtd_write_oob(nand, offset, &ops);
> +
> +				if ((flags & WITH_WR_VERIFY) && !rval)
> +					rval = nand_verify_page_oob(nand,
> +							&ops, offset);
> +
>   				if (rval != 0)
>   					break;
>
> @@ -620,6 +710,11 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>
>   			rval = nand_write(nand, offset, &truncated_write_size,
>   					p_buffer);
> +
> +			if ((flags & WITH_WR_VERIFY) && !rval)
> +				rval = nand_verify(nand, offset,
> +					truncated_write_size, p_buffer);
> +
>   			offset += write_size;
>   			p_buffer += write_size;
>   		}
> diff --git a/include/nand.h b/include/nand.h
> index 15e31ab..49a05dc 100644
> --- a/include/nand.h
> +++ b/include/nand.h
> @@ -134,11 +134,15 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>   				  * is a 'mode' meaning it cannot be mixed with
>   				  * other flags */
>   #define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
> +#define WITH_WR_VERIFY	(1 << 2) /* verify data was written correctly */
>
>   int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
>   			size_t *actual, loff_t lim, u_char *buffer, int flags);
>   int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
>   int nand_torture(nand_info_t *nand, loff_t offset);
> +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops,
> +			loff_t ofs);
> +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf);
>
>   #define NAND_LOCK_STATUS_TIGHT	0x01
>   #define NAND_LOCK_STATUS_UNLOCK 0x04
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

      parent reply	other threads:[~2015-02-11  6:45 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-03 17:58 [U-Boot] [PATCH 1/5] nand: Add verification functions Peter Tyser
2015-02-03 17:58 ` [U-Boot] [PATCH 2/5] cmd_nand: Verify writes to NAND Peter Tyser
2015-02-11  6:45   ` Heiko Schocher
2015-02-03 17:58 ` [U-Boot] [PATCH 3/5] dfu: nand: Verify writes Peter Tyser
2015-02-04  9:22   ` Lukasz Majewski
2015-02-11  6:45   ` Heiko Schocher
2015-02-03 17:58 ` [U-Boot] [PATCH 4/5] nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE Peter Tyser
2015-02-11  6:46   ` Heiko Schocher
2015-02-03 17:58 ` [U-Boot] [PATCH 5/5] nand: yaffs: Remove the "nand write.yaffs" command Peter Tyser
2015-02-11  6:45 ` Heiko Schocher [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54DAFA7D.5030505@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox