[U-Boot] [PATCH 2/2] mx6: Rework s_init to be spl_board_init() and gate_ungate_all_mx6_pfds()

[Stefano Babic <sbabic@denx.de>]

On 11/02/2015 01:07, Tom Rini wrote:
> To facilitate changing lowlevel_init to become s_init, move the current
> contents of s_int() to gate_ungate_all_mx6_pfds() (and add extern to
> arch/arm/include/asm/arch-mx6/crm_regs.h) and add a default weak
> spl_board_init() that calls this function.  The cm_fx6 platform already
> has a spl_board_init() so make that call the new function as well.
> 
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Cc: Nikita Kiryanov <nikita@compulab.co.il>
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
>  arch/arm/cpu/armv7/mx6/soc.c             |    7 ++++++-
>  arch/arm/include/asm/arch-mx6/crm_regs.h |    2 ++
>  board/compulab/cm_fx6/spl.c              |    2 ++
>  include/configs/imx6_spl.h               |    1 +
>  4 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
> index 5f5f497..ecc4272 100644
> --- a/arch/arm/cpu/armv7/mx6/soc.c
> +++ b/arch/arm/cpu/armv7/mx6/soc.c
> @@ -385,7 +385,7 @@ const struct boot_mode soc_boot_modes[] = {
>  	{NULL,		0},
>  };
>  
> -void s_init(void)
> +void gate_ungate_all_mx6_pfds(void)
>  {
>  	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
>  	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> @@ -429,6 +429,11 @@ void s_init(void)
>  	writel(mask528, &anatop->pfd_528_clr);
>  }
>  
> +void __weak spl_board_init(void)
> +{
> +	gate_ungate_all_mx6_pfds();
> +}
> +
>  #ifdef CONFIG_IMX_HDMI
>  void imx_enable_hdmi_phy(void)
>  {
> diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
> index 39f3c07..700175e 100644
> --- a/arch/arm/include/asm/arch-mx6/crm_regs.h
> +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
> @@ -104,6 +104,8 @@ struct mxc_ccm_reg {
>  	u32 analog_pfd_528_clr;
>  	u32 analog_pfd_528_tog;
>  };
> +
> +void gate_ungate_all_mx6_pfds(void);
>  #endif
>  
>  /* Define the bits in register CCR */
> diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
> index 5b4b76f..83be867 100644
> --- a/board/compulab/cm_fx6/spl.c
> +++ b/board/compulab/cm_fx6/spl.c
> @@ -341,6 +341,8 @@ void spl_board_init(void)
>  {
>  	u32 boot_device = spl_boot_device();
>  
> +	gate_ungate_all_mx6_pfds();
> +
>  	if (boot_device == BOOT_DEVICE_SPI)
>  		puts("Booting from SPI flash\n");
>  	else if (boot_device == BOOT_DEVICE_MMC1)
> diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
> index 1b9c277..d49370d 100644
> --- a/include/configs/imx6_spl.h
> +++ b/include/configs/imx6_spl.h
> @@ -29,6 +29,7 @@
>  #define CONFIG_SPL_TEXT_BASE		0x00908000
>  #define CONFIG_SPL_MAX_SIZE		0x10000
>  #define CONFIG_SPL_STACK		0x0091FFB8
> +#define CONFIG_SPL_BOARD_INIT
>  #define CONFIG_SPL_LIBCOMMON_SUPPORT
>  #define CONFIG_SPL_LIBGENERIC_SUPPORT
>  #define CONFIG_SPL_SERIAL_SUPPORT
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================