From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 11 Feb 2015 12:41:21 +0100 Subject: [U-Boot] [PATCH v5 2/3] pmic:pfuze implement pmic_mode_init In-Reply-To: <54DAB781.1090504@freescale.com> References: <1422324844-1563-1-git-send-email-Peng.Fan@freescale.com> <1422324844-1563-3-git-send-email-Peng.Fan@freescale.com> <54CA7288.3020904@denx.de> <54DAB781.1090504@freescale.com> Message-ID: <54DB3FE1.30104@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Peng, On 11/02/2015 02:59, Peng Fan wrote: > Hi, Stefano > > On 1/30/2015 1:48 AM, Stefano Babic wrote: >> On 27/01/2015 03:14, Peng Fan wrote: >>> This patch is to implement pmic_mode_init function, and add prototype >>> in header file. >>> >>> This function is to set switching mode for pmic buck regulators to >>> improve system efficiency. >>> >>> Mode: >>> OFF: The regulator is switched off and the output voltage is discharged. >>> PFM: In this mode, the regulator is always in PFM mode, which >>> is useful at light loads for optimized efficiency. >>> PWM: In this mode, the regulator is always in PWM mode operation >>> regardless of load conditions. >>> APS: In this mode, the regulator moves automatically between >>> pulse skipping mode and PWM mode depending on load conditions. >>> >>> Signed-off-by: Peng Fan >>> Acked-by: Przemyslaw Marczak >>> --- >> Applied to u-boot-imx, thanks ! > I did not see this patch applied to u-boot-imx, I saw only patch 1/3 is > applied. Do you miss this one? >> I see. I have applied only patches that are assigned to me (in patchwork), in this case only Patch 1/3. Patch 2 and 3 were still assigned to Przemyslaw (but we have his ACK). I assign the patches to me and I will apply them. However, something bad happened. No idea how it could happen, but applying patch1/3, the define for SWITCH_SIZE disappeared - see in file. I cannot find a valid reason for that. I fix it myself, and I start rebuilding to check breakage before pushing on the server. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================