public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase
Date: Thu, 12 Feb 2015 09:21:08 -0800	[thread overview]
Message-ID: <54DCE104.8010009@broadcom.com> (raw)
In-Reply-To: <CAL6W153XNDE36YkAhAWnjX0L767qF71PAQC2oC-CeqkzPo3VUQ@mail.gmail.com>



On 15-02-12 01:21 AM, Dileep Katta wrote:
> Hi Rob,
>
> On 12 February 2015 at 14:35, Rob Herring <robherring2@gmail.com> wrote:
>> On Tue, Feb 10, 2015 at 2:49 AM, Dileep Katta <dileep.katta@linaro.org> wrote:
>>> Adds the fastboot erase functionality, to erase a partition
>>> specified by name. The erase is performed based on erase group size,
>>> to avoid erasing other partitions. The start address and the size
>>> is aligned to the erase group size for this.
>>>
>>> Currently only supports erasing from eMMC.
>>>
>>> Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
>>> ---
>>> Note: The changes are on top of oem command support added by robh at kernel.org
>>>
>>>   common/fb_mmc.c                 | 58 +++++++++++++++++++++++++++++++++++++++++
>>>   drivers/usb/gadget/f_fastboot.c | 23 ++++++++++++++++
>>>   include/fb_mmc.h                |  1 +
>>>   3 files changed, 82 insertions(+)
>>>
>>> diff --git a/common/fb_mmc.c b/common/fb_mmc.c
>>> index 6ea3938..3911989 100644
>>> --- a/common/fb_mmc.c
>>> +++ b/common/fb_mmc.c
>>> @@ -10,6 +10,7 @@
>>>   #include <part.h>
>>>   #include <aboot.h>
>>>   #include <sparse_format.h>
>>> +#include <mmc.h>
>>>
>>>   #ifndef CONFIG_FASTBOOT_GPT_NAME
>>>   #define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
>>> @@ -110,3 +111,60 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer,
>>>                  write_raw_image(dev_desc, &info, cmd, download_buffer,
>>>                                  download_bytes);
>>>   }
>>> +
>>> +void fb_mmc_erase(const char *cmd, char *response)
>>> +{
>>> +       int ret;
>>> +       block_dev_desc_t *dev_desc;
>>> +       disk_partition_t info;
>>> +       lbaint_t blks, blks_start, blks_size, grp_size;
>>> +       struct mmc *mmc = find_mmc_device(CONFIG_FASTBOOT_FLASH_MMC_DEV);
>>> +
>>> +       if (mmc == NULL) {
>>> +               error("invalid mmc device\n");
>>> +               fastboot_fail("invalid mmc device");
>>
>> Perhaps fastboot_fail should also call error().
> There is error() before every fastboot_fail(). You mean to move
> error() inside fastboot_fail()? If yes, I will do it.

I disagree - most of the error() report more information about the 
issue; and the fastboot_fail() just informs the host that it was 
unsuccessful -- I don't think that we should force these to be the same....

Thanks, Steve
>>
>>> +               return;
>>> +       }
>>> +
>>> +       /* initialize the response buffer */
>>> +       response_str = response;
>>> +
>>> +       dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
>>> +       if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
>>> +               error("invalid mmc device\n");
>>> +               fastboot_fail("invalid mmc device");
>>> +               return;
>>> +       }
>>> +
>>> +       ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
>>> +       if (ret) {
>>> +               error("cannot find partition: '%s'\n", cmd);
>>> +               fastboot_fail("cannot find partition");
>>> +               return;
>>> +       }
>>> +
>>> +       puts("Erasing partition\n");
>>
>> This can probably be dropped since you have a print below.
> Will remove.
>>> +
>>> +       /* Align blocks to erase group size to avoid erasing other partitions */
>>
>> The partitioning could should probably enforce optimal alignment, but
>> I guess that's a separate patch.
> Fine. Will do it as a separate patch.
>>
>>> +       grp_size = mmc->erase_grp_size;
>>> +       blks_start = (info.start + grp_size - 1) & ~(grp_size - 1);
>>> +       if (info.size >= grp_size)
>>> +               blks_size = (info.size - (blks_start - info.start)) &
>>> +                               (~(grp_size - 1));
>>> +       else
>>> +               blks_size = 0;
>>> +
>>> +       printf("Erasing blocks " LBAFU " to " LBAFU " due to alignment\n",
>>> +              blks_start, blks_start + blks_size);
>>> +
>>> +       blks = dev_desc->block_erase(dev_desc->dev, blks_start, blks_size);
>>> +       if (blks != blks_size) {
>>> +               error("failed erasing from device %d\n", dev_desc->dev);
>>> +               fastboot_fail("failed erasing from device");
>>> +               return;
>>> +       }
>>> +
>>> +       printf("........ erased " LBAFU " bytes from '%s'\n",
>>> +              blks_size * info.blksz, cmd);
>>> +       fastboot_okay("");
>>> +}
>>> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>>> index f7d84bf..a8d8205 100644
>>> --- a/drivers/usb/gadget/f_fastboot.c
>>> +++ b/drivers/usb/gadget/f_fastboot.c
>>> @@ -535,6 +535,26 @@ static void cb_oem(struct usb_ep *ep, struct usb_request *req)
>>>          }
>>>   }
>>>
>>> +static void cb_erase(struct usb_ep *ep, struct usb_request *req)
>>
>> This should be conditional on CONFIG_FASTBOOT_FLASH
> Will make it conditional as in cb_oem().
>>
>>> +{
>>> +       char *cmd = req->buf;
>>> +       char response[RESPONSE_LEN];
>>> +
>>> +       strsep(&cmd, ":");
>>> +       if (!cmd) {
>>> +               error("missing partition name\n");
>>> +               fastboot_tx_write_str("FAILmissing partition name");
>>> +               return;
>>> +       }
>>> +
>>> +       strcpy(response, "FAILno flash device defined");
>>> +
>>> +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
>>> +       fb_mmc_erase(cmd, response);
>>> +#endif
>>> +       fastboot_tx_write_str(response);
>>> +}
>>> +
>>>   struct cmd_dispatch_info {
>>>          char *cmd;
>>>          void (*cb)(struct usb_ep *ep, struct usb_request *req);
>>> @@ -566,6 +586,9 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = {
>>>          {
>>>                  .cmd = "oem",
>>>                  .cb = cb_oem,
>>> +       }, {
>>> +               .cmd = "erase",
>>> +               .cb = cb_erase,
>>>          },
>>>   };
>>>
>>> diff --git a/include/fb_mmc.h b/include/fb_mmc.h
>>> index 1ad1d13..402ba9b 100644
>>> --- a/include/fb_mmc.h
>>> +++ b/include/fb_mmc.h
>>> @@ -6,3 +6,4 @@
>>>
>>>   void fb_mmc_flash_write(const char *cmd, void *download_buffer,
>>>                          unsigned int download_bytes, char *response);
>>> +void fb_mmc_erase(const char *cmd, char *response);
>>> --
>>> 1.8.3.2
>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>
> Thanks for the comments. Will send v2 once I get your input on fastboot_fail().
>
> Regards,
> Dileep
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

      reply	other threads:[~2015-02-12 17:21 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-10  8:49 [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase Dileep Katta
2015-02-10 21:25 ` Steve Rae
2015-02-12  8:29   ` Dileep Katta
2015-02-13 20:45     ` Steve Rae
2015-02-16 20:40       ` Dileep Katta
2015-02-16 21:21         ` Steve Rae
2015-02-17 12:57           ` Dileep Katta
2015-02-17 13:18             ` [U-Boot] [PATCH v2 " Dileep Katta
2015-02-24  9:14               ` Lukasz Majewski
2015-02-24 11:13                 ` Dileep Katta
2015-02-17 15:55             ` [U-Boot] [PATCH v1 " Matt Reimer
2015-02-12  6:35 ` Rob Herring
2015-02-12  9:21   ` Dileep Katta
2015-02-12 17:21     ` Steve Rae [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54DCE104.8010009@broadcom.com \
    --to=srae@broadcom.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox