[U-Boot] [PATCH] EXYNOS5: Add function to enable exynos5420 usbdev phy ctrl

[Minkyu Kang <mk7.kang@samsung.com>]

On 21/01/15 13:51, Joonyoung Shim wrote:
> Exynos5420 has different registers with other exynos5 SoCs to control
> usb device phy, so need separated function to enable exynos5420 usb
> device phy.
> 
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
> ---
> I used "usbdev" instead of "usbdrd" on function name because registers
> name prefix is usbdev_.
> 
>  arch/arm/cpu/armv7/exynos/power.c | 28 ++++++++++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
> index 1520d64..1b12051 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -102,10 +102,34 @@ static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable)
>  	}
>  }
>  
> +static void exynos5420_set_usbdev_phy_ctrl(unsigned int enable)
> +{
> +	struct exynos5420_power *power =
> +		(struct exynos5420_power *)samsung_get_base_power();
> +
> +	if (enable) {
> +		/* Enabling USBDEV_PHY */
> +		setbits_le32(&power->usbdev_phy_control,
> +				POWER_USB_DRD_PHY_CTRL_EN);
> +		setbits_le32(&power->usbdev1_phy_control,
> +				POWER_USB_DRD_PHY_CTRL_EN);
> +	} else {
> +		/* Disabling USBDEV_PHY */
> +		clrbits_le32(&power->usbdev_phy_control,
> +				POWER_USB_DRD_PHY_CTRL_EN);
> +		clrbits_le32(&power->usbdev1_phy_control,
> +				POWER_USB_DRD_PHY_CTRL_EN);
> +	}
> +}
> +
>  void set_usbdrd_phy_ctrl(unsigned int enable)
>  {
> -	if (cpu_is_exynos5())
> -		exynos5_set_usbdrd_phy_ctrl(enable);
> +	if (cpu_is_exynos5()) {
> +		if (proid_is_exynos5420() || proid_is_exynos5800())
> +			exynos5420_set_usbdev_phy_ctrl(enable);
> +		else
> +			exynos5_set_usbdrd_phy_ctrl(enable);
> +	}
>  }
>  
>  static void exynos5_dp_phy_control(unsigned int enable)
> 


applied to u-boot-samsung.

Thank,
Minkyu Kang.