[U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs

[Jan Kiszka <jan.kiszka@siemens.com>]

On 2015-02-16 15:02, Jan Kiszka wrote:
> On 2015-02-16 14:51, Mark Rutland wrote:
>> On Mon, Feb 16, 2015 at 01:44:36PM +0000, Jan Kiszka wrote:
>>> On 2015-02-16 14:37, Mark Rutland wrote:
>>>> On Mon, Feb 16, 2015 at 12:54:49PM +0000, Jan Kiszka wrote:
>>>>> We only set CNTFRQ in arch_timer_init for the boot CPU. But this has to
>>>>> happen for all cores.
>>>>>
>>>>> Fixing this resolves problems of KVM with emulating the generic
>>>>> timer/counter.
>>>>>
>>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>>> ---
>>>>>  arch/arm/cpu/armv7/tegra-common/psci.S | 13 +++++++++++++
>>>>>  1 file changed, 13 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/cpu/armv7/tegra-common/psci.S b/arch/arm/cpu/armv7/tegra-common/psci.S
>>>>> index b7501fb..119c246 100644
>>>>> --- a/arch/arm/cpu/armv7/tegra-common/psci.S
>>>>> +++ b/arch/arm/cpu/armv7/tegra-common/psci.S
>>>>> @@ -51,12 +51,25 @@ ENTRY(psci_arch_init)
>>>>>  
>>>>>  	mrc	p15, 0, r4, c0, c0, 5	@ MPIDR
>>>>>  	and	r4, r4, #7		@ number of CPUs in cluster
>>>>> +
>>>>> +	adr	r5, _sys_clock_freq
>>>>> +	cmp	r4, #0
>>>>> +
>>>>> +	mrceq   p15, 0, r7, c14, c0, 0	@ read CNTFRQ from CPU0
>>>>> +	streq	r7, [r5]
>>>>> +
>>>>> +	ldrne	r7, [r5]
>>>>> +	mcrne   p15, 0, r7, c14, c0, 0	@ write CNTFRQ to CPU1..3
>>>>
>>>> Is it not possible to have a hook that uses the same variable as
>>>> arch_timer_init rather than doing a here copy? It seems a shame to
>>>> duplicate the effort.
>>>
>>> The problem is related to the different address spaces. Here we run in
>>> the secure monitor, arch_timer_init - to my understanding - in
>>> non-secure mode. Didn't find a pattern so far how to transfer data (and
>>> that shouldn't be more complex than the above code).
>>
>> Surely arch_timer_init must be run in a secure mode in order to be
>> allowed to write to CNTFRQ?
> 
> Ah, right.
> 
>>
>> If this is simply the easiest way of moving the data around then there's
>> no real problem with it; it's just a shame that it only happens in the
>> PSCI case.
> 
> OK, I'll check again. Maybe it's easier than I thought.

It isn't: the variable we would have to write - conditionally, i.e. not
for the SPL build - is not yet where it will finally be. The monitor is
copied later on, but the symbol points to the destination already. One
can account for that, but the result won't get simpler and cleaner IMHO.

Jan

-- 
Siemens AG, Corporate Technology, CT RTC ITP SES-DE
Corporate Competence Center Embedded Linux