[U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 24-02-15 10:02, Hans de Goede wrote:
> Hi,
>
> On 23-02-15 18:45, Pantelis Antoniou wrote:
>> Hi Hans,
>>
>>> On Feb 19, 2015, at 22:03 , Hans de Goede <hdegoede@redhat.com> wrote:
>>>
>>> High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this
>>> capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13
>>> tablet, so always set it thereby fixing this.
>>>
>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>> ---
>>> drivers/mmc/sunxi_mmc.c | 6 +-----
>>> 1 file changed, 1 insertion(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
>>> index ebfec7c..2233545 100644
>>> --- a/drivers/mmc/sunxi_mmc.c
>>> +++ b/drivers/mmc/sunxi_mmc.c
>>> @@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
>>>
>>>     cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
>>>     cfg->host_caps = MMC_MODE_4BIT;
>>> -    cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
>>> -#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
>>> -    defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
>>> -    cfg->host_caps |= MMC_MODE_HC;
>>> -#endif
>>> +    cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
>>>     cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
>>>
>>>     cfg->f_min = 400000;
>>> --
>>> 2.1.0
>>
>> Thanks, applied.
>
> Thanks, but since this was touching only sunxi code this has already been
> merged through the sunxi tree, if you rebase on the latest master this
> should drop from your tree.

Ah I see that Tom has already pulled from your tree too, so now the patch
is upstream through both pulls, which git handles without problems, so
we're good here.

Regards,

Hans