[U-Boot] [linux-sunxi] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 02/24/2015 03:53 AM, Siarhei Siamashka wrote:
> On Mon, 23 Feb 2015 20:44:10 +0000
> Adam Sampson <ats@offog.org> wrote:
>
>> The tpr3 (timing skew) parameter is used in all supported versions of
>> the sunxi DRAM controller, but it was only enabled for sun4i in
>> 47e3501a76894f4ba08bc61f33774bd5d39ff464.
>>
>> Signed-off-by: Adam Sampson <ats@offog.org>
>> ---
>>   board/sunxi/dram_sun5i_auto.c |    2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
>> index e52d54c..660b18e 100644
>> --- a/board/sunxi/dram_sun5i_auto.c
>> +++ b/board/sunxi/dram_sun5i_auto.c
>> @@ -24,7 +24,7 @@ static struct dram_para dram_para = {
>>   #	include "dram_timings_sun4i.h"
>>   	.active_windowing = 1,
>>   #endif
>> -	.tpr3 = 0,
>> +	.tpr3 = CONFIG_DRAM_TPR3,
>>   	.tpr4 = 0,
>>   	.tpr5 = 0,
>>   	.emr1 = CONFIG_DRAM_EMR1,
>
> Oops. Thanks for spotting this.
>
> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Thanks!

Queued up in u-boot-sunxi/next for merging, with Siarhei's ack,

Regards,

Hans