From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Tue, 24 Feb 2015 17:39:39 +0100 Subject: [U-Boot] [linux-sunxi] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i In-Reply-To: <20150224045328.52af1efe@i7> References: <1424724250-11618-1-git-send-email-ats@offog.org> <20150224045328.52af1efe@i7> Message-ID: <54ECA94B.4010300@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 02/24/2015 03:53 AM, Siarhei Siamashka wrote: > On Mon, 23 Feb 2015 20:44:10 +0000 > Adam Sampson wrote: > >> The tpr3 (timing skew) parameter is used in all supported versions of >> the sunxi DRAM controller, but it was only enabled for sun4i in >> 47e3501a76894f4ba08bc61f33774bd5d39ff464. >> >> Signed-off-by: Adam Sampson >> --- >> board/sunxi/dram_sun5i_auto.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c >> index e52d54c..660b18e 100644 >> --- a/board/sunxi/dram_sun5i_auto.c >> +++ b/board/sunxi/dram_sun5i_auto.c >> @@ -24,7 +24,7 @@ static struct dram_para dram_para = { >> # include "dram_timings_sun4i.h" >> .active_windowing = 1, >> #endif >> - .tpr3 = 0, >> + .tpr3 = CONFIG_DRAM_TPR3, >> .tpr4 = 0, >> .tpr5 = 0, >> .emr1 = CONFIG_DRAM_EMR1, > > Oops. Thanks for spotting this. > > Acked-by: Siarhei Siamashka Thanks! Queued up in u-boot-sunxi/next for merging, with Siarhei's ack, Regards, Hans