From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-fsl-qoriq master
Date: Wed, 25 Feb 2015 13:29:17 -0800 [thread overview]
Message-ID: <54EE3EAD.8090403@freescale.com> (raw)
Tom,
The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 94e3c8c4fd7bfe395fa467973cd647551d6d98c7:
crypto/fsl - Add progressive hashing support using hardware acceleration.
(2015-02-25 13:20:02 -0800)
----------------------------------------------------------------
Alison Wang (2):
arm: ls102xa: Define default values for some CCSR macros
arm: ls1021x: Add support for initializing CAAM's stream id
Arnab Basu (2):
ARMv8/fsl-lsch3: Patch cpu node properties in DT for online cores
ARMv8/ls2085a: Switch to passing earlycon to kernel
Bhupesh Sharma (3):
fsl-ch3/lowlevel: TZPC and TZASC programming to configure non-secure accesses
armv8/fsl-lsch3: Add fdt-fixup for clock frequency of the DUART nodes
ls2085/configs: Ensure right banners are printed for EMU and SIMU
J. German Rivera (1):
drivers/mc: Migrated MC Flibs to 0.5.2
Kuldip Giroh (1):
ARMv8/LS2085A: HugeTLB support is required by default in LS NADK
Minghuan Lian (4):
arm/ls102xa: create TLB to map PCIe region
arm/ls102xa: use a array to define pexmscportsr
arm/ls1021a: add PCIe settings
driver/pci: add Layerscape PCIe driver
Stuart Yoder (1):
ARMv8/ls2085a: Move kernel image load address
Volodymyr Riazantsev (1):
mmc: fsl_esdhc: Add support for DDR mode
York Sun (15):
armv8/fsl-lsch3: Change normal memory shareability
armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stack
armv8/ls2085a: Enable cluster timebase for all clusters
driver/ddr/fsl: Adjust CAS to preamble override for emulator
driver/ddr/fsl: Add workaround for A008336
driver/ddr/fsl: Add workround for erratumn A008514
armv8/fsl-lsch3: Add support for second DDR clock
driver/ddr/fsl: Add support for multiple DDR clocks
ARMv8/LS2085A: Enable auto precharge for DP-DDR
driver/ddr/fsl: Fix a typo in timing_cfg_8 calculation
ARMv8/LS2085A: Adjust system clock and DDR clock
driver/ddr/fsl: Add sync of refresh
armv8/fsl-lsch3: Enable workaround for A008336
armv8/fsl-lsch3: Enable erratum workround for A008514
armv8/ls2085a_emu: Enable sync of refresh
chenhui zhao (1):
arm: ls102xa: workaround for cache coherency problem
gaurav rana (2):
crypto/fsl: Make function names consistent for blob
encapsulation/decapsulation.
crypto/fsl - Add progressive hashing support using hardware acceleration.
Kconfig | 4 +-
README | 23 +-
arch/arm/cpu/armv7/ls102xa/cpu.c | 231 +++++++++-
arch/arm/cpu/armv8/cache.S | 6 +
arch/arm/cpu/armv8/cache_v8.c | 18 +-
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 62 +--
arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 28 +-
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 132 ++++++
arch/arm/cpu/armv8/fsl-lsch3/mp.c | 8 +
arch/arm/cpu/armv8/fsl-lsch3/mp.h | 1 +
arch/arm/cpu/armv8/fsl-lsch3/speed.c | 16 +-
arch/arm/include/asm/arch-fsl-lsch3/config.h | 38 ++
arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 3 +
arch/arm/include/asm/arch-ls102xa/config.h | 15 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 40 +-
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 57 +++
arch/arm/include/asm/armv8/mmu.h | 3 +-
arch/arm/include/asm/global_data.h | 3 +
arch/arm/include/asm/system.h | 1 +
arch/arm/lib/bootm.c | 2 +-
board/freescale/common/ls102xa_stream_id.c | 15 +
board/freescale/ls1021aqds/ls1021aqds.c | 21 +
board/freescale/ls1021atwr/ls1021atwr.c | 21 +
board/freescale/ls2085a/ddr.c | 1 +
board/freescale/ls2085a/ls2085a.c | 29 +-
common/cmd_blob.c | 18 +-
common/hash.c | 10 +
doc/README.fsl-trustzone-components | 25 ++
drivers/crypto/fsl/fsl_blob.c | 4 +-
drivers/crypto/fsl/fsl_hash.c | 138 +++++-
drivers/crypto/fsl/fsl_hash.h | 34 ++
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 216 +++++----
drivers/ddr/fsl/ddr1_dimm_params.c | 18 +-
drivers/ddr/fsl/ddr2_dimm_params.c | 12 +-
drivers/ddr/fsl/ddr3_dimm_params.c | 8 +-
drivers/ddr/fsl/ddr4_dimm_params.c | 8 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 36 +-
drivers/ddr/fsl/lc_common_dimm_params.c | 27 +-
drivers/ddr/fsl/main.c | 29 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 4 +-
drivers/ddr/fsl/options.c | 6 +-
drivers/ddr/fsl/util.c | 67 ++-
drivers/mmc/fsl_esdhc.c | 8 +-
drivers/net/Makefile | 2 +-
drivers/net/{fsl_mc => fsl-mc}/Makefile | 4 +-
drivers/net/fsl-mc/dpmng.c | 91 ++++
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 49 ++
drivers/net/{fsl_mc => fsl-mc}/mc.c | 132 ++++--
drivers/net/fsl-mc/mc_sys.c | 63 +++
drivers/pci/pcie_layerscape.c | 471 +++++++++++++++++++-
include/configs/ls1021aqds.h | 24 +
include/configs/ls1021atwr.h | 24 +
include/configs/ls2085a_common.h | 19 +-
include/configs/ls2085a_emu.h | 4 +
include/configs/ls2085a_simu.h | 3 +
include/configs/mx6_common.h | 2 +
include/fsl-mc/fsl_dpmng.h | 121 +++++
include/{ => fsl-mc}/fsl_mc.h | 0
include/fsl-mc/fsl_mc_cmd.h | 132 ++++++
include/fsl-mc/fsl_mc_sys.h | 26 ++
include/fsl_ddr.h | 17 +-
include/fsl_ddr_dimm_params.h | 2 +-
include/fsl_esdhc.h | 1 +
include/fsl_sec.h | 26 ++
include/hw_sha.h | 41 +-
lib/Kconfig | 36 ++
67 files changed, 2404 insertions(+), 334 deletions(-)
create mode 100644 doc/README.fsl-trustzone-components
create mode 100644 drivers/crypto/fsl/fsl_hash.h
rename drivers/net/{fsl_mc => fsl-mc}/Makefile (75%)
create mode 100644 drivers/net/fsl-mc/dpmng.c
create mode 100644 drivers/net/fsl-mc/fsl_dpmng_cmd.h
rename drivers/net/{fsl_mc => fsl-mc}/mc.c (67%)
create mode 100644 drivers/net/fsl-mc/mc_sys.c
create mode 100644 include/fsl-mc/fsl_dpmng.h
rename include/{ => fsl-mc}/fsl_mc.h (100%)
create mode 100644 include/fsl-mc/fsl_mc_cmd.h
create mode 100644 include/fsl-mc/fsl_mc_sys.h
Thanks.
York
next reply other threads:[~2015-02-25 21:29 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 21:29 York Sun [this message]
2015-02-26 2:58 ` [U-Boot] Please pull u-boot-fsl-qoriq master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-05-24 5:07 Prabhakar Kushwaha
2019-05-26 10:48 ` Tom Rini
2019-05-22 12:31 Prabhakar Kushwaha
2019-05-22 16:58 ` Tom Rini
2019-03-15 12:54 Prabhakar Kushwaha
2019-03-17 19:30 ` Tom Rini
2019-03-04 8:57 Prabhakar Kushwaha
2019-03-05 2:47 ` Tom Rini
2019-02-20 7:31 Prabhakar Kushwaha
2019-02-21 23:09 ` Tom Rini
2019-01-18 18:09 York Sun
2019-01-19 14:02 ` Tom Rini
2018-09-28 15:04 York Sun
2018-09-30 2:27 ` Tom Rini
2018-08-23 19:01 York Sun
2018-08-24 2:45 ` Tom Rini
2018-08-13 16:19 York Sun
2018-08-13 23:55 ` Tom Rini
2018-06-12 17:24 York Sun
2018-06-12 22:33 ` Tom Rini
2018-06-08 23:49 York Sun
2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
2018-06-11 12:25 ` Tom Rini
2018-06-09 4:57 ` York Sun
2018-06-11 12:29 ` Tom Rini
2018-06-11 16:33 ` York Sun
2018-05-11 4:20 York Sun
2018-05-11 15:45 ` Tom Rini
2018-03-20 22:07 York Sun
2018-03-21 1:56 ` Tom Rini
2018-02-12 17:06 York Sun
2018-02-12 22:32 ` Tom Rini
2018-01-31 23:04 York Sun
2018-02-01 13:08 ` Tom Rini
2018-01-24 2:00 York Sun
2018-01-24 16:28 ` Tom Rini
2018-01-17 18:33 York Sun
2018-01-18 13:45 ` Tom Rini
2018-01-11 4:57 York Sun
2018-01-11 18:42 ` Tom Rini
2018-01-05 1:19 York Sun
2018-01-05 16:00 ` York Sun
2017-12-18 16:26 York Sun
2017-12-19 1:56 ` Tom Rini
2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
2017-10-27 21:29 York Sun
2017-10-29 11:58 ` Tom Rini
2017-10-12 14:51 York Sun
2017-10-12 22:29 ` Tom Rini
2017-09-23 5:08 York Sun
2017-09-24 14:40 ` Tom Rini
2017-09-12 15:59 York Sun
2017-09-12 21:13 ` Tom Rini
2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
2017-08-11 14:47 ` York Sun
2017-08-11 14:51 ` Tom Rini
2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
2017-06-02 17:46 york sun
2017-06-04 17:11 ` Tom Rini
2017-04-25 15:44 York Sun
2017-04-26 19:16 ` Tom Rini
2017-04-18 15:32 York Sun
2017-04-19 13:02 ` Tom Rini
2017-03-28 18:02 york sun
2017-04-04 19:59 ` Tom Rini
2017-03-14 19:31 york sun
2017-03-09 21:33 york sun
2017-03-10 15:23 ` Tom Rini
2017-03-10 16:46 ` york sun
2017-03-10 21:07 ` Tom Rini
2017-03-10 21:21 ` york sun
2017-03-10 21:42 ` Tom Rini
2017-02-03 22:35 york sun
2017-02-05 16:25 ` Tom Rini
2017-01-19 17:20 york sun
2017-01-20 13:50 ` Tom Rini
2016-12-16 17:43 york sun
2016-12-17 3:18 ` Tom Rini
2016-12-05 19:39 york sun
2016-12-06 0:37 ` Tom Rini
2016-11-23 19:13 york sun
2016-11-29 15:55 ` Tom Rini
2016-11-23 1:06 york sun
2016-11-23 12:22 ` Tom Rini
2016-11-23 16:53 ` york sun
2016-09-20 18:09 york sun
2016-09-20 19:31 ` Tom Rini
2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
2016-09-20 20:23 ` york sun
2016-08-02 23:42 york sun
2016-08-03 12:19 ` Tom Rini
2016-07-26 20:28 york sun
2016-07-27 0:58 ` Tom Rini
2016-07-19 20:29 york sun
2016-07-20 2:22 ` Tom Rini
2016-06-10 22:18 York Sun
2016-06-19 14:03 ` Tom Rini
2016-05-24 17:28 York Sun
2016-05-24 23:18 ` Tom Rini
2016-04-06 17:35 York Sun
2016-04-08 19:44 ` Tom Rini
2016-03-29 16:06 York Sun
2016-03-29 22:06 ` Tom Rini
2016-03-22 15:52 york sun
2016-03-23 1:58 ` Tom Rini
2016-02-24 17:02 york sun
2016-02-25 15:22 ` Tom Rini
2016-02-02 2:41 york sun
2016-02-02 15:49 ` Tom Rini
2015-12-17 6:42 York Sun
2015-12-18 0:28 ` Tom Rini
2015-12-15 1:16 York Sun
2015-12-15 23:29 ` Tom Rini
2015-12-16 1:40 ` York Sun
2015-12-16 1:48 ` York Sun
2015-12-16 1:59 ` Tom Rini
2015-12-16 2:01 ` York Sun
2015-12-16 2:14 ` York Sun
2015-11-30 19:32 York Sun
2015-12-01 1:37 ` Tom Rini
2015-10-30 16:26 York Sun
2015-10-30 19:54 ` Tom Rini
2015-09-02 3:00 York Sun
2015-09-02 21:58 ` Tom Rini
2015-08-04 16:08 York Sun
2015-08-04 17:50 ` Tom Rini
2015-07-20 21:07 York Sun
2015-07-21 13:50 ` Tom Rini
2015-05-22 20:55 York Sun
2015-05-23 12:42 ` Tom Rini
2015-04-24 2:17 York Sun
2015-04-28 14:50 ` Tom Rini
2015-01-24 15:44 York Sun
2015-01-27 11:50 ` Tom Rini
2014-10-20 21:29 York Sun
2014-10-21 19:55 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EE3EAD.8090403@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox