From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766
Date: Wed, 25 Feb 2015 23:11:23 -0600 [thread overview]
Message-ID: <54EEAAFB.3080606@ti.com> (raw)
In-Reply-To: <1424899415.2534.3.camel@aldrin>
On 02/25/2015 03:23 PM, Paul Kocialkowski wrote:
> Le mercredi 25 f?vrier 2015 ? 08:32 -0600, menon.nishanth at gmail.com a
[...]
>> That said, Paul, if you could contribute patches to the effect of
>> integrating all these platforms to ti_*_common.h, that'd be great.
>
> I will try to come up with a common configuration for omap3 (and
> possibly omap4 and omap5 too). Do you mind if I drop the ti_ prefix? I
> don't feel it's relevant to mention the chip manufacturer there,
> especially when it's not used anywhere else in the tree (except for the
> boards that are actually procuced by TI such as the evms, etc).
>
I think we have maintained ti_ prefix for omap3,4,5 etc.. might make
sense to retain that.. but then, I am no decision maker in that regards,
I suggest posting a proposal and seeing feedback folks have w.r.t.
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2015-02-26 5:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-24 22:57 [U-Boot] [PATCH V2 0/9] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 1/9] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 2/9] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-02-25 11:02 ` Paul Kocialkowski
2015-02-25 17:53 ` Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 3/9] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-02-25 11:06 ` Paul Kocialkowski
2015-02-24 22:57 ` [U-Boot] [PATCH V2 4/9] ARM: Provide a mechanism to invoke SoC specific errata WA for CP15 Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 5/9] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 6/9] configs: ti_omap5_common: Enable " Nishanth Menon
2015-02-24 22:57 ` [U-Boot] [PATCH V2 7/9] ARM: OMAP3: Introduce OMAP3 Cortex-A8 revision specific errata Nishanth Menon
2015-02-25 11:15 ` Paul Kocialkowski
2015-02-25 19:49 ` Nishanth Menon
2015-03-03 7:30 ` Siarhei Siamashka
2015-02-24 22:57 ` [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-02-25 11:19 ` Paul Kocialkowski
2015-02-25 11:31 ` Igor Grinberg
2015-02-25 12:27 ` Paul Kocialkowski
2015-02-25 14:32 ` menon.nishanth at gmail.com
2015-02-25 21:23 ` Paul Kocialkowski
2015-02-26 5:11 ` Nishanth Menon [this message]
2015-02-27 19:27 ` Paul Kocialkowski
2015-02-24 22:57 ` [U-Boot] [PATCH V2 9/9] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
-- strict thread matches above, loose matches on Subject: below --
2015-02-24 22:52 [U-Boot] [PATCH V2 0/9] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-02-24 22:52 ` [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EEAAFB.3080606@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox