[U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage

[U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage

[Fabio Estevam]

User Mass Storage is very useful for flashing the on-board eMMC.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Remove EXT2/EXT4 and BOUNCE_BUFFER support

 include/configs/mx6sabre_common.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f0f721e..337b865 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -279,4 +279,18 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
-- 
1.9.1

[U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options

[Fabio Estevam]

Add EXT2/EXT4 and BOUNCE_BUFFER support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Newly introduced in this series

 include/configs/mx6sabre_common.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 337b865..67d74d0 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -56,6 +56,8 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-- 
1.9.1

[U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage

[Otavio Salvador]

On Thu, Feb 26, 2015 at 1:50 PM, Fabio Estevam
<fabio.estevam@freescale.com> wrote:
> User Mass Storage is very useful for flashing the on-board eMMC.
>
> Add support for it.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options

[Otavio Salvador]

On Thu, Feb 26, 2015 at 1:50 PM, Fabio Estevam
<fabio.estevam@freescale.com> wrote:
> Add EXT2/EXT4 and BOUNCE_BUFFER support.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>


Acked-by: Otavio Salvador <otavio@ossystems.com.br>

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options

[Nikolay Dimitrov]

Hi Fabio,

On 02/26/2015 06:50 PM, Fabio Estevam wrote:
> Add EXT2/EXT4 and BOUNCE_BUFFER support.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - Newly introduced in this series
>
>   include/configs/mx6sabre_common.h | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
> index 337b865..67d74d0 100644
> --- a/include/configs/mx6sabre_common.h
> +++ b/include/configs/mx6sabre_common.h
> @@ -56,6 +56,8 @@
>   #define CONFIG_GENERIC_MMC
>   #define CONFIG_BOUNCE_BUFFER
>   #define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
>   #define CONFIG_CMD_FAT
>   #define CONFIG_DOS_PARTITION

I don't see the BOUNCE_BUFFER config option changed, and also no change
related to EXT2.

Kind regards,
Nikolay