From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 02 Mar 2015 10:45:04 +0100 Subject: [U-Boot] [PATCH 1/2] mx31: Fix boot hang by avoiding vector relocation In-Reply-To: <1424693349-12252-1-git-send-email-fabio.estevam@freescale.com> References: <1424693349-12252-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <54F43120.50509@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, Magnus, Anatolji, Sebastian, On 23/02/2015 13:09, Fabio Estevam wrote: > Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx31 > does not boot anymore. > > Add a specific relocate_vectors macro that skips the vector relocation, as the > i.MX31 SoC does not provide RAM at the high vectors address (0xFFFF0000), and > (0x00000000) maps to ROM. > > This allows mx31 to boot again. > > Cc: Anatolij Gustschin > Cc: Magnus Lilja > Signed-off-by: Fabio Estevam > --- As boards are currently broken, I think can help if patches are merged even if they are not fully tested. I could at least test on a mx35, and board boots again. Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================