[U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support

[U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

With UMS support we are able to flash the eMMC from U-boot, which is very 
convenient.

Add UMS support to make the eMMC flashing process easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Use the standard 'USB Mass Storage' term

 board/warp/warp.c      |  6 ++++++
 include/configs/warp.h | 26 ++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/board/warp/warp.c b/board/warp/warp.c
index 3b275c2..21ac5e7 100644
--- a/board/warp/warp.c
+++ b/board/warp/warp.c
@@ -21,6 +21,7 @@
 #include <watchdog.h>
 #include <fsl_esdhc.h>
 #include <mmc.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -82,6 +83,11 @@ int board_mmc_init(bd_t *bis)
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 
+int board_usb_phy_mode(int port)
+{
+	return USB_INIT_DEVICE;
+}
+
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 82036e4..cfc2323 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -120,6 +120,32 @@
 #define CONFIG_CMD_CACHE
 #endif
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG2 port enabled */
+#endif
+
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
-- 
1.9.1

[U-Boot] [PATCH v2 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@freescale.com>

Add EXT2/EXT4 and BOUNCE_BUFFER support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- None

 include/configs/warp.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/configs/warp.h b/include/configs/warp.h
index cfc2323..8379cec 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -46,6 +46,10 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-- 
1.9.1

[U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support

[Otavio Salvador]

On Sat, Feb 28, 2015 at 3:16 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> With UMS support we are able to flash the eMMC from U-boot, which is very
> convenient.
>
> Add UMS support to make the eMMC flashing process easier.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[U-Boot] [PATCH v2 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options

[Otavio Salvador]

On Sat, Feb 28, 2015 at 3:16 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Add EXT2/EXT4 and BOUNCE_BUFFER support.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support

[Stefano Babic]

On 28/02/2015 19:16, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> With UMS support we are able to flash the eMMC from U-boot, which is very 
> convenient.
> 
> Add UMS support to make the eMMC flashing process easier.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v2 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options

[Stefano Babic]

On 28/02/2015 19:16, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Add EXT2/EXT4 and BOUNCE_BUFFER support.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================