[U-Boot] [PATCH v2 0/4] various fixes for apalis/colibri_t30

[U-Boot] [PATCH v2 0/4] various fixes for apalis/colibri_t30

[Marcel Ziswiler]

The following is a set of various fixes for Toradex Apalis and Colibri
T30.

Changes in v2:
- Include commit subject too when referencing a previous commit as
  suggested by Stephen
- Add various acked- and reviewed-by
- Drop CONFIG_CMDLINE_EDITING and CONFIG_CMD_FS_GENERIC as they already
  get pulled in via config_distro_defaults.h as noted by Stephen

Marcel Ziswiler (4):
  dm: tegra: dts: add aliases for spi on apalis_t30
  apalis/colibri_t30: fix MMC/SD card detect GPIOs
  apalis_t30: enable gigabit ethernet via pcie
  apalis/colibri_t30: add misc cmds increase buf sizes and max args

 arch/arm/dts/tegra30-apalis.dts  | 13 +++++++++++--
 arch/arm/dts/tegra30-colibri.dts |  4 +++-
 include/configs/apalis_t30.h     | 29 ++++++++++++++++++++++-------
 include/configs/colibri_t30.h    | 24 ++++++++++++++++++++++--
 4 files changed, 58 insertions(+), 12 deletions(-)

-- 
1.9.3

[U-Boot] [PATCH v2 1/4] dm: tegra: dts: add aliases for spi on apalis_t30

[Marcel Ziswiler]

All boards with a SPI interface have a suitable spi alias except Apalis
T30. Add these missing aliases just as the following commit did for the
others:

d2f60f93325a "dm: tegra: dts: Add aliases for spi on tegra30 boards"

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---

Changes in v2:
- Include commit subject too when referencing a previous commit as
  suggested by Stephen

 arch/arm/dts/tegra30-apalis.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts
index 15db0f2..75c5d5f 100644
--- a/arch/arm/dts/tegra30-apalis.dts
+++ b/arch/arm/dts/tegra30-apalis.dts
@@ -18,6 +18,10 @@
 		sdhci0 = "/sdhci at 78000600";
 		sdhci1 = "/sdhci at 78000400";
 		sdhci2 = "/sdhci at 78000000";
+		spi0 = "/spi at 7000d400";
+		spi1 = "/spi at 7000dc00";
+		spi2 = "/spi at 7000de00";
+		spi3 = "/spi at 7000da00";
 		usb0 = "/usb at 7d000000";
 		usb1 = "/usb at 7d004000";
 		usb2 = "/usb at 7d008000";
-- 
1.9.3

[U-Boot] [PATCH v2 2/4] apalis/colibri_t30: fix MMC/SD card detect GPIOs

[Marcel Ziswiler]

This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken
by the following commit:

2b2b50bc8748 "dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs"

While at it also re-add the comments describing which particular
Apalis/Colibri pins those GPIOs are on.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
---

Changes in v2:
- Include commit subject too when referencing a previous commit as
  suggested by Stephen

 arch/arm/dts/tegra30-apalis.dts  | 9 +++++++--
 arch/arm/dts/tegra30-colibri.dts | 4 +++-
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts
index 75c5d5f..13ab42b 100644
--- a/arch/arm/dts/tegra30-apalis.dts
+++ b/arch/arm/dts/tegra30-apalis.dts
@@ -247,13 +247,15 @@
 	sdhci at 78000000 {
 		status = "okay";
 		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
 	};
 
 	sdhci at 78000400 {
 		status = "okay";
 		bus-width = <8>;
-		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
 	};
 
 	sdhci at 78000600 {
@@ -266,12 +268,14 @@
 	usb at 7d000000 {
 		status = "okay";
 		dr_mode = "peripheral";
+		/* USBO1_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
 	};
 
 	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
 	usb at 7d004000 {
 		status = "okay";
+		/* USBH_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		phy_type = "utmi";
 	};
@@ -279,6 +283,7 @@
 	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
 	usb at 7d008000 {
 		status = "okay";
+		/* USBH_EN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts
index 6cd1902..36533dc 100644
--- a/arch/arm/dts/tegra30-colibri.dts
+++ b/arch/arm/dts/tegra30-colibri.dts
@@ -64,7 +64,7 @@
 	sdhci at 78000200 {
 		status = "okay";
 		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
 	};
 
 	sdhci at 78000600 {
@@ -83,12 +83,14 @@
 	usb at 7d004000 {
 		status = "okay";
 		phy_type = "utmi";
+		/* VBUS_LAN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
 	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
 	usb at 7d008000 {
 		status = "okay";
+		/* USBH_PEN */
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 	};
 };
-- 
1.9.3

[U-Boot] [PATCH v2 3/4] apalis_t30: enable gigabit ethernet via pcie

[Marcel Ziswiler]

Now with all the Tegra PCIe and Intel E1000 gigabit Ethernet driver
updates being merged actually make use of it.

While at it get rid of the USB networking support which now does not
make much sense any longer.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

Changes in v2: None

 include/configs/apalis_t30.h | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index 61809fc..b301f9e 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014 Marcel Ziswiler
+ * Copyright (c) 2014-2015 Marcel Ziswiler
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -47,12 +47,8 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
-/* USB networking support */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-
 /* PCI host support */
-#undef CONFIG_PCI	/* just define once Tegra PCIe support got merged */
+#define CONFIG_PCI
 #define CONFIG_PCI_TEGRA
 #define CONFIG_PCI_PNP
 #define CONFIG_CMD_PCI
@@ -60,7 +56,7 @@
 
 /* PCI networking support */
 #define CONFIG_E1000
-#undef CONFIG_E1000_NO_NVM	/* just define once E1000 driver got fixed */
+#define CONFIG_E1000_NO_NVM
 
 /* General networking support */
 #define CONFIG_CMD_NET
-- 
1.9.3

[U-Boot] [PATCH v2 4/4] apalis/colibri_t30: add misc cmds increase buf sizes and max args

[Marcel Ziswiler]

In order to work with our downstream U-Boot environment and update
scripts add support for the following miscellaneous commands:

CONFIG_CMD_SETEXPR
CONFIG_FAT_WRITE

Increase the console I/O and print as well as argument buffer sizes:

CONFIG_SYS_CBSIZE
CONFIG_SYS_PBSIZE
CONFIG_SYS_BARGSIZE

Increase the maximum number of arguments allowed:

CONFIG_SYS_MAXARGS

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---

Changes in v2:
- Drop CONFIG_CMDLINE_EDITING and CONFIG_CMD_FS_GENERIC as they already
  get pulled in via config_distro_defaults.h as noted by Stephen

 include/configs/apalis_t30.h  | 19 +++++++++++++++++++
 include/configs/colibri_t30.h | 24 ++++++++++++++++++++++--
 2 files changed, 41 insertions(+), 2 deletions(-)

diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index b301f9e..ca9982e 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -62,6 +62,25 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+/* Miscellaneous commands */
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_FAT_WRITE
+
+/* Increase console I/O buffer size */
+#undef CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_CBSIZE		1024
+
+/* Increase arguments buffer size */
+#undef CONFIG_SYS_BARGSIZE
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* Increase print buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Increase maximum number of arguments */
+#undef CONFIG_SYS_MAXARGS
+#define CONFIG_SYS_MAXARGS		32
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index ce6f23b..f785046 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014 Stefan Agner
+ * Copyright (c) 2013-2015 Stefan Agner
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -11,10 +11,11 @@
 
 #include "tegra30-common.h"
 
+/* High-level configuration options */
 #define V_PROMPT			"Colibri T30 # "
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T30"
 
-/* Board-specific config */
+/* Board-specific serial config */
 #define CONFIG_SERIAL_MULTI
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
@@ -54,6 +55,25 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+/* Miscellaneous commands */
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_FAT_WRITE
+
+/* Increase console I/O buffer size */
+#undef CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_CBSIZE		1024
+
+/* Increase arguments buffer size */
+#undef CONFIG_SYS_BARGSIZE
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* Increase print buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Increase maximum number of arguments */
+#undef CONFIG_SYS_MAXARGS
+#define CONFIG_SYS_MAXARGS		32
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
-- 
1.9.3

[U-Boot] [PATCH v2 0/4] various fixes for apalis/colibri_t30

[Stephen Warren]

On 02/28/2015 06:05 PM, Marcel Ziswiler wrote:
> The following is a set of various fixes for Toradex Apalis and Colibri
> T30.

The series,
Acked-by: Stephen Warren <swarren@nvidia.com>

[U-Boot] [PATCH v2 0/4] various fixes for apalis/colibri_t30

[Marcel Ziswiler]

On Mon, 2015-03-02 at 09:56 -0700, Stephen Warren wrote:
> The series,
> Acked-by: Stephen Warren <swarren@nvidia.com>
Thanks mate. Anybody actually gona pick that one up please?

[U-Boot] [PATCH v2 0/4] various fixes for apalis/colibri_t30

[Marcel Ziswiler]

On 4 March 2015 17:03:17 CET, Tom Warren >I'll apply this series to u-boot-tegra/next today, and if everything
>checks out, send a PR to Albert tomorrow.
Perfect, thanks Tom.