From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gabriel Dobato Date: Tue, 03 Mar 2015 16:55:08 +0100 Subject: [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card Message-ID: <54F5D95C.4080909@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab: http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option. I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens: ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h: * DB-88F6781-BP B0 */ #define DB_88AP510BP_B_MPP0_7 0x00000000 #define DB_88AP510BP_B_MPP8_15 0x00442000 #define DB_88AP510BP_B_MPP16_23 0x32334043 <--- #define DB_88AP510BP_B_MPP24_31 0x11111111 #define DB_88AP510BP_B_MPP32_39 0x11111111 #define DB_88AP510BP_B_MPP40_47 0x11111111 <--- #define DB_88AP510BP_B_MPP48_55 0x11111111 #define DB_88AP510BP_B_MPP56_63 0x00111111 #define DB_88AP510BP_B_OE_LOW (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19))) #define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF #define DB_88AP510BP_B_OE_VAL_LOW ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19)) #define DB_88AP510BP_B_OE_VAL_HIGH 0x0 ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c: MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] = {{{{ DB_88AP510BP_B_MPP0_7, DB_88AP510BP_B_MPP8_15, DB_88AP510BP_B_MPP16_23, DB_88AP510BP_B_MPP40_47 <------- }}}}; Anyone has faced this problem before? I really appreciate some kind of help. Best regards, Gabriel