From: Dmitry Lifshitz <lifshitz@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
Date: Wed, 04 Mar 2015 08:37:24 +0200 [thread overview]
Message-ID: <54F6A824.9000100@compulab.co.il> (raw)
In-Reply-To: <54F5D95C.4080909@gmail.com>
Hi Gabriel,
Try fixing CM-A510 related code:
mvBoardEnvSpec.h
...
...
/* CM-A510 */
#define CM_A510_MPP0_7 0x00000033
#define CM_A510_MPP8_15 0x00445050
#define CM_A510_MPP16_23 0x66664040
#define CM_A510_MPP24_31 0x11111111
#define CM_A510_MPP32_39 0x11111111
#define CM_A510_MPP40_47 0x11111111
#define CM_A510_MPP48_55 0x11111111
#define CM_A510_MPP56_63 0x00111111
...
board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c
...
...
MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]
...
Regards,
Dmitry
On 03/03/2015 05:55 PM, Gabriel Dobato wrote:
> Hello,
>
> I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510
> SoM(provided by Compulab) using the u-boot image provided by Compulab:
>
> http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
>
> By default, it seems SD-Card is not enabled, so I think I have to
> configure right the MPP option.
>
> I have searched over and over in the code sources, I have change some
> arrays defined in some files that are related to the MPP (pinmux) but
> nothing happens:
>
> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
>
> * DB-88F6781-BP B0 */
> #define DB_88AP510BP_B_MPP0_7 0x00000000
> #define DB_88AP510BP_B_MPP8_15 0x00442000
> #define DB_88AP510BP_B_MPP16_23 0x32334043 <---
> #define DB_88AP510BP_B_MPP24_31 0x11111111
> #define DB_88AP510BP_B_MPP32_39 0x11111111
> #define DB_88AP510BP_B_MPP40_47 0x11111111 <---
> #define DB_88AP510BP_B_MPP48_55 0x11111111
> #define DB_88AP510BP_B_MPP56_63 0x00111111
> #define DB_88AP510BP_B_OE_LOW
> (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
>
> #define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
> #define DB_88AP510BP_B_OE_VAL_LOW
> ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
>
> #define DB_88AP510BP_B_OE_VAL_HIGH 0x0
>
>
>
>
> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
> MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =
> {{{{
> DB_88AP510BP_B_MPP0_7,
> DB_88AP510BP_B_MPP8_15,
> DB_88AP510BP_B_MPP16_23,
> DB_88AP510BP_B_MPP40_47 <-------
> }}}};
>
> Anyone has faced this problem before? I really appreciate some kind of
> help.
>
> Best regards,
>
> Gabriel
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>
next prev parent reply other threads:[~2015-03-04 6:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 15:55 [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card Gabriel Dobato
2015-03-04 6:37 ` Dmitry Lifshitz [this message]
2015-03-04 8:18 ` Gabriel Dobato
2015-03-04 8:50 ` Dmitry Lifshitz
2015-03-05 9:48 ` Gabriel Dobato
2015-03-15 12:00 ` Dmitry Lifshitz
-- strict thread matches above, loose matches on Subject: below --
2015-06-16 16:23 Gandha Naringrekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54F6A824.9000100@compulab.co.il \
--to=lifshitz@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox