[U-Boot] [PATCH 0/3] samsung: board: reserve dram for the secure firmware

[U-Boot] [PATCH 0/3] samsung: board: reserve dram for the secure firmware

[Przemyslaw Marczak]

Since the few exynos based boards requires memory reservation,
of last DRAM bank, the code could be in a common place.

This patchset moves the reservation code from odroid board file
to common samsung board file.

Przemyslaw Marczak (3):
  board: samsung: reserve memory for the secure firmware
  Odroid-XU3: enable the last dram bank and reserve 22MiB
  Odroid U3: use common code for dram reservation

 board/samsung/common/board.c  |  6 ++++++
 board/samsung/odroid/odroid.c |  4 ----
 include/configs/odroid.h      |  5 +++--
 include/configs/odroid_xu3.h  | 10 ++++------
 4 files changed, 13 insertions(+), 12 deletions(-)

-- 
1.9.1

[U-Boot] [PATCH 1/3] board: samsung: reserve memory for the secure firmware

[Przemyslaw Marczak]

Since more than one board requires memory reservation
for the secure firmware, the reservation code can be
made in a common code.
Now, to reserve some part of the the last bank,
board config should define:
- CONFIG_TZSW_RESERVED_DRAM - len in bytes
- CONFIG_NR_DRAM_BANKS - number of memory banks

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
---
 board/samsung/common/board.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index da2245f..a2123cd 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -82,7 +82,13 @@ int board_init(void)
 	}
 	boot_temp_check();
 #endif
+#ifdef CONFIG_TZSW_RESERVED_DRAM_SIZE
+	/* The last few MB of memory can be reserved for secure firmware */
+	ulong size = CONFIG_TZSW_RESERVED_DRAM_SIZE;
 
+	gd->ram_size -= size;
+	gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= size;
+#endif
 	return exynos_init();
 }
 
-- 
1.9.1

[U-Boot] [PATCH 1/3] board: samsung: reserve memory for the secure firmware

[Przemyslaw Marczak]

Hello Minkyu,

On 02/17/2015 02:50 PM, Przemyslaw Marczak wrote:
> Since more than one board requires memory reservation
> for the secure firmware, the reservation code can be
> made in a common code.
> Now, to reserve some part of the the last bank,
> board config should define:
> - CONFIG_TZSW_RESERVED_DRAM - len in bytes
> - CONFIG_NR_DRAM_BANKS - number of memory banks
>
> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
> Cc: Akshay Saraswat <akshay.s@samsung.com>
> Cc: Hyungwon Hwang <human.hwang@samsung.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
>   board/samsung/common/board.c | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
> index da2245f..a2123cd 100644
> --- a/board/samsung/common/board.c
> +++ b/board/samsung/common/board.c
> @@ -82,7 +82,13 @@ int board_init(void)
>   	}
>   	boot_temp_check();
>   #endif
> +#ifdef CONFIG_TZSW_RESERVED_DRAM_SIZE
> +	/* The last few MB of memory can be reserved for secure firmware */
> +	ulong size = CONFIG_TZSW_RESERVED_DRAM_SIZE;
>
> +	gd->ram_size -= size;
> +	gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= size;
> +#endif
>   	return exynos_init();
>   }
>
>

There are no comments, so can you apply this patchset?

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com

[U-Boot] [PATCH 1/3] board: samsung: reserve memory for the secure firmware

[Minkyu Kang]

Hi,

On 04/03/15 21:19, Przemyslaw Marczak wrote:
> Hello Minkyu,
> 
> On 02/17/2015 02:50 PM, Przemyslaw Marczak wrote:
>> Since more than one board requires memory reservation
>> for the secure firmware, the reservation code can be
>> made in a common code.
>> Now, to reserve some part of the the last bank,
>> board config should define:
>> - CONFIG_TZSW_RESERVED_DRAM - len in bytes
>> - CONFIG_NR_DRAM_BANKS - number of memory banks
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>> Cc: Akshay Saraswat <akshay.s@samsung.com>
>> Cc: Hyungwon Hwang <human.hwang@samsung.com>
>> Cc: Minkyu Kang <mk7.kang@samsung.com>
>> ---
>>   board/samsung/common/board.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
>> index da2245f..a2123cd 100644
>> --- a/board/samsung/common/board.c
>> +++ b/board/samsung/common/board.c
>> @@ -82,7 +82,13 @@ int board_init(void)
>>       }
>>       boot_temp_check();
>>   #endif
>> +#ifdef CONFIG_TZSW_RESERVED_DRAM_SIZE
>> +    /* The last few MB of memory can be reserved for secure firmware */
>> +    ulong size = CONFIG_TZSW_RESERVED_DRAM_SIZE;
>>
>> +    gd->ram_size -= size;
>> +    gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= size;
>> +#endif
>>       return exynos_init();
>>   }
>>
>>
> 
> There are no comments, so can you apply this patchset?
> 
> Best regards,

applied to u-boot-samsung.

Thanks,
Minkyu Kang.

[U-Boot] [PATCH 2/3] Odroid-XU3: enable the last dram bank and reserve 22MiB

[Przemyslaw Marczak]

This commit enables the last DRAM bank and reserves
the last 22 MiB of it, for the secure firmware.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
---
 include/configs/odroid_xu3.h | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index 9fa8660..c395020 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -25,13 +25,11 @@
 
 #define CONFIG_CMD_MMC
 
-/*
- * FIXME: The number of bank is actually 8. But there is no way to reserve the
- * last 16 Mib in the last bank now. So I just excluded the last bank
- * temporally.
- */
-#define CONFIG_NR_DRAM_BANKS	7
+#define CONFIG_NR_DRAM_BANKS	8
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+/* Reserve the last 22 MiB for the secure firmware */
+#define CONFIG_SYS_MEM_TOP_HIDE		(22UL << 20UL)
+#define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE
 
 #define CONFIG_ENV_IS_IN_MMC
 
-- 
1.9.1

[U-Boot] [PATCH 3/3] Odroid U3: use common code for dram reservation

[Przemyslaw Marczak]

This commit removes the dram reservation from board file,
because it is done in a common code.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
---
 board/samsung/odroid/odroid.c | 4 ----
 include/configs/odroid.h      | 5 +++--
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index bff6ac9..44e062b 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -424,10 +424,6 @@ int exynos_early_init_f(void)
 
 int exynos_init(void)
 {
-	/* The last MB of memory is reserved for secure firmware */
-	gd->ram_size -= SZ_1M;
-	gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= SZ_1M;
-
 	board_gpio_init();
 
 	return 0;
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 9d5dbdc..46ec760 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -29,6 +29,9 @@
 #define CONFIG_SYS_SDRAM_BASE	0x40000000
 #define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+/* Reserve the last 1 MiB for the secure firmware */
+#define CONFIG_SYS_MEM_TOP_HIDE		(1UL << 20UL)
+#define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
@@ -56,8 +59,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MEM_TOP_HIDE	(SZ_1M)	/* ram console */
-
 #define CONFIG_SYS_MONITOR_BASE	0x00000000
 
 #define CONFIG_ENV_IS_IN_MMC
-- 
1.9.1