From mboxrd@z Thu Jan  1 00:00:00 1970
From: York Sun <yorksun@freescale.com>
Date: Thu, 5 Mar 2015 12:09:13 -0800
Subject: [U-Boot] [PATCH] powerpc: 85xx: Modify
 CONFIG_USB_MAX_CONTROLLER_COUNT for P1022DS
In-Reply-To: <1422600731-28958-1-git-send-email-ying.zhang@freescale.com>
References: <1422600731-28958-1-git-send-email-ying.zhang@freescale.com>
Message-ID: <54F8B7E9.8060109@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



On 01/29/2015 10:52 PM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530@freescale.com>
> 
> Modify CONFIG_USB_MAX_CONTROLLER_COUNT value to 1 on P1022DS.
> As ETSEC2 and USB2 are muxed; thus if ETSEC2 is enabled, the
> system bus hangs on USB2 if ETSEC2 is enabled but "usb start"
> command is issued. Hence making default controller count to 1
> to avoid system hang.
> 
> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
> Reviewed-by: Yusong Sun <yorksun@freescale.com>
> ---


Applied to u-boot-mpc85xx master, awaiting for upstream.

York