[U-Boot] [PATCH][v2] powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs

[York Sun <yorksun@freescale.com>]

On 01/18/2015 11:16 PM, Shaveta Leekha wrote:
> The code provides framework for heterogeneous multicore chips based on StarCore
> and Power Architecture which are chasis-2 compliant, like B4860 and B4420
> 
> It will make u-boot recognize all non-ppc cores and peripherals like
> SC3900/DSP CPUs, MAPLE, CPRI and print their configuration in u-boot logs.
> Example boot logs of B4860QDS:
> 
> U-Boot 2015.01-00232-geef6e36-dirty (Jan 19 2015 - 11:58:45)
> 
> CPU0:  B4860E, Version: 2.2, (0x86880022)
> Core:  e6500, Version: 2.0, (0x80400120)
> Clock Configuration:
>        CPU0:1600 MHz, CPU1:1600 MHz, CPU2:1600 MHz, CPU3:1600 MHz,
>        DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz,
>        DSP CPU4:1200 MHz, DSP CPU5:1200 MHz,
>        CCB:666.667 MHz,
>        DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:166.667 MHz
>        CPRI:600  MHz
>        MAPLE:600  MHz, MAPLE-ULB:800  MHz, MAPLE-eTVPE:1000 MHz
>        FMAN1: 666.667 MHz
>        QMAN:  333.333 MHz
> 
> Top level changes include:
> (1) Top level CONFIG to identify HETEROGENUOUS clusters
> (2) CONFIGS for SC3900/DSP components
> (3) Global structures like "cpu_type" and "MPC85xx_SYS_INFO"
>     updated for dsp cores and other components
> (3) APIs to get DSP num cores and their Mask like:
>         cpu_dsp_mask, cpu_num_dspcores etc same as that of PowerPC
> (5) Code to fetch and print SC cores and other heterogenous
>     device's frequencies
> (6) README added for the same
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> ---
> chnages in v2:
> 	Incorporated review comments
> 	All DSP aware code is enclosed with #ifdef
> 	to not increase the uboot code size for other platforms
> 	Tested it on B4860QDS and on T4240QDS
> 

Applied to u-boot-mpc85xx master, awaiting for upstream.

York