[U-Boot] [PATCH 0/3] sunxi: Ippo_q8h: Enable OTG VBUS detection using AXP223

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 09-03-15 08:44, Chen-Yu Tsai wrote:
> Hi Hans,
>
> This series fixes otg support on the A23 q8h tablets. It adds support
> for the AXP's (AXP221/223 for now) VBUS detection function.
>
> I've tested this with a USB wireless keyboard dongle, which works fine.
> More importantly, I'm using this and your mainline kernel musb work plus
> a few A23 dts patches to get musb working on my q8h tablet in host mode.
> I have an ethernet dongle plugged in, which works reasonably well.

Thanks for working on this, I've merged this into u-boot-sunxi/next
and I plan to send a pull-req for this to get it into v2015.4-rc# soon,
as this fixes a regression which I (deliberately) introduced.

It would be cool if you do similar patches for the mainline kernel, for
the mainline kernel I would really like to see the status bit exported
as part of the gpio-chip which we still need to add to the axp2xx code for
the axp2xx gpio pins, this way the existing kernel musb code can just use
it.

I also believe that Ian was right when he said that we should probably
also make these bits special gpio-s in u-boot rather then using custom
API-s for them. But this is something which we can fix later, for now
this fixes the regression and as such is good enough.

> Note that U-Boot never calls musb_shutdown() to do proper cleanup, like
> disabling VBUS, so the current state carries on into Linux.

Hmm true, I guess that is not necessarily a problem, but something which
we do need to keep in mind.

Regards,

Hans