[U-Boot] [PATCH 1/3] arm: mx6: tqma6: Fix USB and add other filesystems

[Markus Niebel <list-09@tqsc.de>]

Am 12.03.2015 um 13:34 schrieb Stefan Roese:
> This patch fixes the USB EHCI support on the TQMa6 SoM. Additionally
> some filesystems are added, included the generic FS commands (e.g.
> ls...).
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Markus Niebel <Markus.Niebel@tq-group.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  include/configs/tqma6.h | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
> index a099687..9022550 100644
> --- a/include/configs/tqma6.h
> +++ b/include/configs/tqma6.h
> @@ -125,16 +125,19 @@
>  #define CONFIG_USB_STORAGE
>  #define CONFIG_USB_HOST_ETHER
>  #define CONFIG_USB_ETHER_SMSC95XX
> -#define CONFIG_MXC_USB_PORT	1
>  #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
> -#define CONFIG_MXC_USB_FLAGS	0
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
>  
>  /* Fuses */
>  #define CONFIG_MXC_OCOTP
>  #define CONFIG_CMD_FUSE
>  
>  #define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
>  #define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FS_GENERIC
>  #define CONFIG_DOS_PARTITION
>  
>  #define CONFIG_CMD_PING
> 
Acked-By: Markus Niebel <Markus.Niebel@tq-group.com>