From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Niebel Date: Thu, 12 Mar 2015 15:25:18 +0100 Subject: [U-Boot] [PATCH 2/3] arm: mx6: tqma6: Update to optionally configure an alternative SPI setup In-Reply-To: <1426163671-23297-2-git-send-email-sr@denx.de> References: <1426163671-23297-1-git-send-email-sr@denx.de> <1426163671-23297-2-git-send-email-sr@denx.de> Message-ID: <5501A1CE.7090902@tqsc.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Stefan, Am 12.03.2015 um 13:34 schrieb Stefan Roese: > By making the tqma6_iomuxc_spi() weak, this patch adds the possibility to > add a different function for this SPI configuration. This can be used > by other baseboards, that might have a different SPI setup. > > This patch will be used by the upcoming WRU-IV board support which also > uses the TQMa6 SoM. > > Signed-off-by: Stefan Roese > --- > board/tqc/tqma6/tqma6.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c > index c9e163e..29db838 100644 > --- a/board/tqc/tqma6/tqma6.c > +++ b/board/tqc/tqma6/tqma6.c > @@ -145,7 +145,7 @@ static unsigned const tqma6_ecspi1_cs[] = { > TQMA6_SF_CS_GPIO, > }; > > -static void tqma6_iomuxc_spi(void) > +__weak void tqma6_iomuxc_spi(void) > { > unsigned i; > When implementing an baseboard specific init handler, we will get a warning about unused tqma6_ecspi1_pads and tqma6_ecspi1_cs, or did I miss something? Just as a thought (not ready): Could we supply CS initialisation data via defines in the baseboard config header and append it to the tables if needed? Regards Markus