[U-Boot] [PATCH 1/2] imx:mx6dlsabresd fix error detecting thermal

[U-Boot] [PATCH 1/2] imx:mx6dlsabresd fix error detecting thermal

[Peng Fan]

Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN,
uboot will complains "CPU:   Temperature: Can't find sensor device".
This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F
is not configured.

After applying this patch, uboot can correctly detect the temperature.
"
U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36)

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
CPU:   Temperature 44 C
"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
---
 configs/mx6dlsabresd_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig
index 6adfd55..cde0d70 100644
--- a/configs/mx6dlsabresd_defconfig
+++ b/configs/mx6dlsabresd_defconfig
@@ -1,5 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_DM=y
 CONFIG_DM_THERMAL=y
-- 
1.8.4

[U-Boot] [PATCH 2/2] imx:mx6slevk support reading temperature

[Peng Fan]

This patch is to support reading temperature for mx6slevk board.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
---
 configs/mx6slevk_defconfig        | 4 ++++
 configs/mx6slevk_spinor_defconfig | 4 ++++
 include/configs/mx6slevk.h        | 7 +++++++
 3 files changed, 15 insertions(+)

diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig
index fb8c4de..c6b3108 100644
--- a/configs/mx6slevk_defconfig
+++ b/configs/mx6slevk_defconfig
@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SLEVK=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
index 93efe73..454cb40 100644
--- a/configs/mx6slevk_spinor_defconfig
+++ b/configs/mx6slevk_spinor_defconfig
@@ -1,3 +1,7 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SLEVK=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 1221418..0a2fa27 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -251,4 +251,11 @@
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC2*/
 #endif
 
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
 #endif				/* __CONFIG_H */
-- 
1.8.4

[U-Boot] [PATCH 2/2] imx:mx6slevk support reading temperature

[Stefano Babic]

On 10/03/2015 08:33, Peng Fan wrote:
> This patch is to support reading temperature for mx6slevk board.
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic




-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 1/2] imx:mx6dlsabresd fix error detecting thermal

[Stefano Babic]

On 10/03/2015 08:33, Peng Fan wrote:
> Before add CONFIG_SYS_MALLOC_F and CONFIG_SYS_MALLOC_F_LEN,
> uboot will complains "CPU:   Temperature: Can't find sensor device".
> This is because DM and DM_THERMAL are enabled, but SYS_MALLOC_F
> is not configured.
> 
> After applying this patch, uboot can correctly detect the temperature.
> "
> U-Boot 2015.04-rc2-00146-g48b6e30-dirty (Mar 09 2015 - 13:04:36)
> 
> CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
> CPU:   Temperature 44 C
> "
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic




-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================