[U-Boot] [PATCH v2 1/7] sunxi: gpio: Indentation fix

[Hans de Goede <hdegoede@redhat.com>]

Hi,

Thanks for the patches, I had to make this fixup (squashed) to fix
vbus detect to work on axp221:

-------------------------- drivers/gpio/sunxi_gpio.c --------------------------
index 6296092..670af0c 100644
@@ -21,6 +21,9 @@
  #ifdef CONFIG_AXP209_POWER
  #include <axp209.h>
  #endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif

  DECLARE_GLOBAL_DATA_PTR;

Other then that + adding a small
blurb with some info on the Ainol AW1 board this set has been
merged as is.

The entire set has been queued up in u-boot-sunxi/next for upstream merging.

Regards,

Hans


On 22-03-15 18:07, Paul Kocialkowski wrote:
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>   arch/arm/include/asm/arch-sunxi/gpio.h | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> index f2c247d..a66e45c 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -84,7 +84,7 @@ struct sunxi_gpio_reg {
>   #define GPIO_CFG_INDEX(pin)	(((pin) & 0x1f) >> 3)
>   #define GPIO_CFG_OFFSET(pin)	((((pin) & 0x1f) & 0x7) << 2)
>
> -#define GPIO_DRV_INDEX(pin)   (((pin) & 0x1f) >> 4)
> +#define GPIO_DRV_INDEX(pin)	(((pin) & 0x1f) >> 4)
>   #define GPIO_DRV_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
>
>   #define GPIO_PULL_INDEX(pin)	(((pin) & 0x1f) >> 4)
> @@ -194,7 +194,7 @@ enum sunxi_gpio_number {
>   #define SUN8I_GPL3_R_UART_RX	2
>
>   #define SUN9I_GPN0_R_RSB_SCK	3
> -#define SUN9I_GPN1_R_RSB_SDA    3
> +#define SUN9I_GPN1_R_RSB_SDA	3
>
>   /* GPIO pin pull-up/down config */
>   #define SUNXI_GPIO_PULL_DISABLE	0
>