From: Robert Baldyga <r.baldyga@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 4/7] malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN
Date: Tue, 24 Mar 2015 07:15:12 +0100 [thread overview]
Message-ID: <551100F0.2090605@samsung.com> (raw)
In-Reply-To: <1426761779-14507-5-git-send-email-yamada.masahiro@socionext.com>
On 03/19/2015 11:42 AM, Masahiro Yamada wrote:
> The default value of CONFIG_SYS_MALLOC_F_LEN is defined by ./Kconfig
> as 0x400. Each defconfig or Kconfig need not repeat the same value.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
>
> Changes in v2: None
>
> arch/arm/cpu/armv7/exynos/Kconfig | 3 ---
> arch/arm/cpu/armv7/omap3/Kconfig | 3 ---
> arch/arm/mach-uniphier/Kconfig | 3 ---
> board/amcc/canyonlands/Kconfig | 4 ----
> board/ti/am335x/Kconfig | 3 ---
> configs/Linksprite_pcDuino3_fdt_defconfig | 1 -
> configs/am335x_igep0033_defconfig | 1 -
> configs/cm_fx6_defconfig | 1 -
> configs/cm_t335_defconfig | 1 -
> configs/gwventana_defconfig | 1 -
> configs/mx6dlsabreauto_defconfig | 1 -
> configs/mx6qsabreauto_defconfig | 1 -
> configs/mx6qsabresd_defconfig | 1 -
> configs/mx6sxsabresd_defconfig | 1 -
> configs/nokia_rx51_defconfig | 1 -
> configs/pcm051_rev1_defconfig | 1 -
> configs/pcm051_rev3_defconfig | 1 -
> configs/pengwyn_defconfig | 1 -
> configs/pepper_defconfig | 1 -
> configs/rpi_2_defconfig | 1 -
> configs/rpi_defconfig | 1 -
> configs/s5p_goni_defconfig | 1 -
> configs/sandbox_defconfig | 1 -
> configs/smdkc100_defconfig | 1 -
> configs/snapper9260_defconfig | 1 -
> configs/snapper9g20_defconfig | 1 -
> 26 files changed, 37 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
> index eb86a7f..9e47ed3 100644
> --- a/arch/arm/cpu/armv7/exynos/Kconfig
> +++ b/arch/arm/cpu/armv7/exynos/Kconfig
> @@ -83,9 +83,6 @@ config DM_GPIO
> config SYS_MALLOC_F
> default y
>
> -config SYS_MALLOC_F_LEN
> - default 0x400
> -
> source "board/samsung/smdkv310/Kconfig"
> source "board/samsung/trats/Kconfig"
> source "board/samsung/universal_c210/Kconfig"
> diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
> index 65da6e2..aa2ff46 100644
> --- a/arch/arm/cpu/armv7/omap3/Kconfig
> +++ b/arch/arm/cpu/armv7/omap3/Kconfig
> @@ -109,9 +109,6 @@ config DM_SERIAL
> config SYS_MALLOC_F
> default y if DM
>
> -config SYS_MALLOC_F_LEN
> - default 0x400 if DM
> -
> config SYS_SOC
> default "omap3"
>
> diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
> index 8335685..b6dc75f 100644
> --- a/arch/arm/mach-uniphier/Kconfig
> +++ b/arch/arm/mach-uniphier/Kconfig
> @@ -51,9 +51,6 @@ endchoice
> config SYS_MALLOC_F
> default y
>
> -config SYS_MALLOC_F_LEN
> - default 0x400
> -
> config CMD_PINMON
> bool "Enable boot mode pins monitor command"
> default y
> diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
> index 848e08f..c0dbd18 100644
> --- a/board/amcc/canyonlands/Kconfig
> +++ b/board/amcc/canyonlands/Kconfig
> @@ -43,8 +43,4 @@ config SYS_MALLOC_F
> bool
> default y
>
> -config SYS_MALLOC_F_LEN
> - hex
> - default 0x400
> -
> endif
> diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
> index 722f9d5..8c45892 100644
> --- a/board/ti/am335x/Kconfig
> +++ b/board/ti/am335x/Kconfig
> @@ -50,7 +50,4 @@ config DM_SERIAL
> config SYS_MALLOC_F
> default y if DM
>
> -config SYS_MALLOC_F_LEN
> - default 0x400 if DM
> -
> endif
> diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig
> index 1504664..87dd38f 100644
> --- a/configs/Linksprite_pcDuino3_fdt_defconfig
> +++ b/configs/Linksprite_pcDuino3_fdt_defconfig
> @@ -14,4 +14,3 @@ CONFIG_DRAM_CLK=480
> CONFIG_DRAM_ZQ=122
> CONFIG_DRAM_EMR1=4
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig
> index 8d38e26..a439298 100644
> --- a/configs/am335x_igep0033_defconfig
> +++ b/configs/am335x_igep0033_defconfig
> @@ -4,4 +4,3 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
> CONFIG_ARM=y
> CONFIG_TARGET_AM335X_IGEP0033=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
> index 2fd21cf..00cbdd2 100644
> --- a/configs/cm_fx6_defconfig
> +++ b/configs/cm_fx6_defconfig
> @@ -6,4 +6,3 @@ CONFIG_DM=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_SERIAL=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig
> index 086e526..31705f2 100644
> --- a/configs/cm_t335_defconfig
> +++ b/configs/cm_t335_defconfig
> @@ -2,4 +2,3 @@ CONFIG_SPL=y
> CONFIG_ARM=y
> CONFIG_TARGET_CM_T335=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig
> index 6eab019..d6bbdc1 100644
> --- a/configs/gwventana_defconfig
> +++ b/configs/gwventana_defconfig
> @@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
> CONFIG_ARM=y
> CONFIG_TARGET_GW_VENTANA=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig
> index 47f3f87..b3816ec 100644
> --- a/configs/mx6dlsabreauto_defconfig
> +++ b/configs/mx6dlsabreauto_defconfig
> @@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6
> CONFIG_ARM=y
> CONFIG_TARGET_MX6QSABREAUTO=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> CONFIG_DM=y
> CONFIG_DM_THERMAL=y
> diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig
> index ab72942..df09296 100644
> --- a/configs/mx6qsabreauto_defconfig
> +++ b/configs/mx6qsabreauto_defconfig
> @@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,
> CONFIG_ARM=y
> CONFIG_TARGET_MX6QSABREAUTO=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> CONFIG_DM=y
> CONFIG_DM_THERMAL=y
> diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
> index 112918b..cad4281 100644
> --- a/configs/mx6qsabresd_defconfig
> +++ b/configs/mx6qsabresd_defconfig
> @@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128
> CONFIG_ARM=y
> CONFIG_TARGET_MX6SABRESD=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> CONFIG_DM=y
> CONFIG_DM_THERMAL=y
> diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
> index cc82322..12a9bdc 100644
> --- a/configs/mx6sxsabresd_defconfig
> +++ b/configs/mx6sxsabresd_defconfig
> @@ -2,6 +2,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,M
> CONFIG_ARM=y
> CONFIG_TARGET_MX6SXSABRESD=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> CONFIG_DM=y
> CONFIG_DM_THERMAL=y
> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
> index 1bb7664..48a1b29 100644
> --- a/configs/nokia_rx51_defconfig
> +++ b/configs/nokia_rx51_defconfig
> @@ -5,4 +5,3 @@ CONFIG_DM=n
> CONFIG_DM_SERIAL=n
> CONFIG_DM_GPIO=n
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig
> index f417aac..a8b10d4 100644
> --- a/configs/pcm051_rev1_defconfig
> +++ b/configs/pcm051_rev1_defconfig
> @@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="REV1"
> CONFIG_ARM=y
> CONFIG_TARGET_PCM051=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig
> index cc6f3f5..ef307d9 100644
> --- a/configs/pcm051_rev3_defconfig
> +++ b/configs/pcm051_rev3_defconfig
> @@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="REV3"
> CONFIG_ARM=y
> CONFIG_TARGET_PCM051=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig
> index 9c6ddf4..86f8bbb 100644
> --- a/configs/pengwyn_defconfig
> +++ b/configs/pengwyn_defconfig
> @@ -2,4 +2,3 @@ CONFIG_SPL=y
> CONFIG_ARM=y
> CONFIG_TARGET_PENGWYN=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig
> index e14b008..438d886 100644
> --- a/configs/pepper_defconfig
> +++ b/configs/pepper_defconfig
> @@ -2,4 +2,3 @@ CONFIG_SPL=y
> CONFIG_ARM=y
> CONFIG_TARGET_PEPPER=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
> index b539d4a..69723d5 100644
> --- a/configs/rpi_2_defconfig
> +++ b/configs/rpi_2_defconfig
> @@ -1,4 +1,3 @@
> CONFIG_ARM=y
> CONFIG_TARGET_RPI_2=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
> index 98d3199..1a5a8e2 100644
> --- a/configs/rpi_defconfig
> +++ b/configs/rpi_defconfig
> @@ -1,4 +1,3 @@
> CONFIG_ARM=y
> CONFIG_TARGET_RPI=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig
> index 33e6fb8..5815667 100644
> --- a/configs/s5p_goni_defconfig
> +++ b/configs/s5p_goni_defconfig
> @@ -3,4 +3,3 @@ CONFIG_ARCH_S5PC1XX=y
> CONFIG_TARGET_S5P_GONI=y
> CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 70f5b86..a0e19ad 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -6,7 +6,6 @@ CONFIG_FIT_SIGNATURE=y
> CONFIG_DM=y
> CONFIG_DEFAULT_DEVICE_TREE="sandbox"
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> CONFIG_CROS_EC=y
> CONFIG_DM_CROS_EC=y
> CONFIG_CROS_EC_SANDBOX=y
> diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig
> index e933a32..585fea6 100644
> --- a/configs/smdkc100_defconfig
> +++ b/configs/smdkc100_defconfig
> @@ -3,4 +3,3 @@ CONFIG_TARGET_SMDKC100=y
> CONFIG_ARCH_S5PC1XX=y
> CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig
> index 3a47505..9a0d0ad 100644
> --- a/configs/snapper9260_defconfig
> +++ b/configs/snapper9260_defconfig
> @@ -6,4 +6,3 @@ CONFIG_DM=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_SERIAL=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
> diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig
> index 1f0244b..82f7a07 100644
> --- a/configs/snapper9g20_defconfig
> +++ b/configs/snapper9g20_defconfig
> @@ -6,4 +6,3 @@ CONFIG_DM=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_SERIAL=y
> CONFIG_SYS_MALLOC_F=y
> -CONFIG_SYS_MALLOC_F_LEN=0x400
>
next prev parent reply other threads:[~2015-03-24 6:15 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-19 10:42 [U-Boot] [PATCH v3 0/7] Some improvements related to build system Masahiro Yamada
2015-03-19 10:42 ` [U-Boot] [PATCH v3 1/7] generic-board: move __HAVE_ARCH_GENERIC_BOARD to Kconfig Masahiro Yamada
2015-03-23 21:33 ` Simon Glass
2015-03-24 8:24 ` Alexey Brodkin
2015-03-28 18:07 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 2/7] generic-board: select SYS_GENERIC_BOARD for some architectures Masahiro Yamada
2015-03-23 21:33 ` Simon Glass
2015-03-24 8:25 ` Alexey Brodkin
2015-03-28 18:08 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 3/7] m68k: remove arch/m68k/lib/board.c Masahiro Yamada
2015-03-23 21:33 ` Simon Glass
2015-03-28 18:08 ` [U-Boot] [U-Boot,v3,3/7] " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 4/7] malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN Masahiro Yamada
2015-03-23 21:33 ` Simon Glass
2015-03-24 6:15 ` Robert Baldyga [this message]
2015-03-28 18:08 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 5/7] malloc_f: enable SYS_MALLOC_F by default if DM is on Masahiro Yamada
2015-03-23 21:33 ` Simon Glass
2015-03-27 20:10 ` Alexey Brodkin
2015-03-28 3:27 ` Masahiro Yamada
2015-03-28 15:16 ` Simon Glass
2015-03-24 6:15 ` Robert Baldyga
2015-03-28 18:08 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 6/7] ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x Masahiro Yamada
2015-03-28 18:08 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-19 10:42 ` [U-Boot] [PATCH v3 7/7] ARM: bcm283x: move SoC headers to mach-bcm283x/include/mach Masahiro Yamada
2015-03-28 18:08 ` [U-Boot] [U-Boot, v3, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=551100F0.2090605@samsung.com \
--to=r.baldyga@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox