[U-Boot] [PATCH v2 10/12] odroid: board: add support to dm pmic api

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello,

On 03/06/2015 03:14 PM, Simon Glass wrote:
> Hi Przemyslaw,
>
> On 3 March 2015 at 09:24, Przemyslaw Marczak <p.marczak@samsung.com> wrote:
>> This commit change the old pmic framework calls with the new ones.
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>> ---
>> Changes v2:
>> - remove board_init_i2c() call
>> - update regulator calls
>> - update headers
>> - samsung/misc.c: include required header
>> ---
>>   board/samsung/common/misc.c   |  1 +
>>   board/samsung/odroid/odroid.c | 52 ++++++++++++++++++++++++++-----------------
>>   2 files changed, 33 insertions(+), 20 deletions(-)
>>
>> diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
>> index 4538ac7..18d71e8 100644
>> --- a/board/samsung/common/misc.c
>> +++ b/board/samsung/common/misc.c
>> @@ -16,6 +16,7 @@
>>   #include <asm/arch/cpu.h>
>>   #include <asm/gpio.h>
>>   #include <linux/input.h>
>> +#include <dm.h>
>>   #include <power/pmic.h>
>>   #include <mmc.h>
>>
>> diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
>> index bff6ac9..2448cde 100644
>> --- a/board/samsung/odroid/odroid.c
>> +++ b/board/samsung/odroid/odroid.c
>> @@ -12,7 +12,9 @@
>>   #include <asm/arch/gpio.h>
>>   #include <asm/gpio.h>
>>   #include <asm/arch/cpu.h>
>> +#include <dm.h>
>>   #include <power/pmic.h>
>> +#include <power/regulator.h>
>>   #include <power/max77686_pmic.h>
>>   #include <errno.h>
>>   #include <usb.h>
>> @@ -402,15 +404,23 @@ static void board_gpio_init(void)
>>
>>   static int pmic_init_max77686(void)
>>   {
>> -       struct pmic *p = pmic_get("MAX77686_PMIC");
>> +       struct udevice *reg;
>> +       int type;
>>
>> -       if (pmic_probe(p))
>> +       if (regulator_get("max77686", &reg)) {
>> +               error("Regulator get error\n");
>>                  return -ENODEV;
>> +       }
>>
>>          /* Set LDO Voltage */
>> -       max77686_set_ldo_voltage(p, 20, 1800000);       /* LDO20 eMMC */
>> -       max77686_set_ldo_voltage(p, 21, 2800000);       /* LDO21 SD */
>> -       max77686_set_ldo_voltage(p, 22, 2800000);       /* LDO22 eMMC */
>> +       type = REGULATOR_TYPE_LDO;
>> +       regulator_set_value(reg, type, 20, 1800000);    /* LDO20 eMMC */
>> +       regulator_set_value(reg, type, 21, 2800000);    /* LDO21 SD */
>> +       regulator_set_value(reg, type, 22, 2800000);    /* LDO22 eMMC */
>> +
>> +       regulator_set_mode(reg, type, 20, OPMODE_ON);
>> +       regulator_set_mode(reg, type, 21, OPMODE_ON);
>> +       regulator_set_mode(reg, type, 22, OPMODE_ON);
>
> These 20, 21, 22 values seem bad to me. Do we not have names? Also I
> see in the device tree that these regulators have the same min and max
> voltage, so perhaps you can use that voltage automatically?
>
> I think when you change the LDOs to devices you might end up with:
>
> struct udevice *ldo;
>
> ret = regulator_get("VCCQ_MMC2_2.8V", &ldo);   // use the regulator
> device name which comes from regulator-name property.
> if (ret) {
>     debug(...)
>     goto err;
> }
> ret = regulator_set_voltage(ldo, 1800000);
> ...error check
> ret = regulator_set_mode(ldo, OPMODE_ON);
> ...error check
>

The above suggestion is implemented in V3.

>>
>>          return 0;
>>   }
>> @@ -435,7 +445,6 @@ int exynos_init(void)
>>
>>   int exynos_power_init(void)
>>   {
>> -       pmic_init(0);
>>          pmic_init_max77686();
>>
>>          return 0;
>> @@ -444,19 +453,21 @@ int exynos_power_init(void)
>>   #ifdef CONFIG_USB_GADGET
>>   static int s5pc210_phy_control(int on)
>>   {
>> -       struct pmic *p_pmic;
>> +       struct udevice *reg;
>> +       int type;
>>
>> -       p_pmic = pmic_get("MAX77686_PMIC");
>> -       if (!p_pmic)
>> +       if (regulator_get("max77686", &reg)) {
>> +               error("Regulator get error\n");
>>                  return -ENODEV;
>> +       }
>>
>> -       if (pmic_probe(p_pmic))
>> -               return -1;
>> +       type = REGULATOR_TYPE_LDO;
>>
>>          if (on)
>> -               return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
>> +               return regulator_set_mode(reg, type, 12, OPMODE_ON);
>>          else
>> -               return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
>> +               return regulator_set_mode(reg, type, 12, OPMODE_LPM);
>> +
>>   }
>>
>>   struct s3c_plat_otg_data s5pc210_otg_data = {
>> @@ -473,7 +484,8 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
>>   int board_usb_init(int index, enum usb_init_type init)
>>   {
>>   #ifdef CONFIG_CMD_USB
>> -       struct pmic *p_pmic;
>> +       struct udevice *reg;
>> +       int type, ret;
>>
>>          /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
>>          /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
>> @@ -491,14 +503,14 @@ int board_usb_init(int index, enum usb_init_type init)
>>          /* Power off and on BUCK8 for LAN9730 */
>>          debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
>>
>> -       p_pmic = pmic_get("MAX77686_PMIC");
>> -       if (p_pmic && !pmic_probe(p_pmic)) {
>> -               max77686_set_buck_voltage(p_pmic, 8, 750000);
>> -               max77686_set_buck_voltage(p_pmic, 8, 3300000);
>> +       if (regulator_get("max77686", &reg)) {
>> +               type = REGULATOR_TYPE_BUCK;
>> +               ret = regulator_set_value(reg, type, 8, 750000);
>> +               ret |= regulator_set_value(reg, type, 8, 3300000);
>> +               if (ret)
>> +                       error("Can't set regulator\n");
>
> We should return a proper error number. Also print it here as it might
> provide clues.
>
>>          }
>> -
>>   #endif
>> -
>>          debug("USB_udc_probe\n");
>>          return s3c_udc_probe(&s5pc210_otg_data);
>>   }
>> --
>> 1.9.1
>>
>
> Regards,
> Simon
>

Thanks,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com