From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Thu, 26 Mar 2015 13:26:57 +0100 Subject: [U-Boot] [PATCH] sunxi: set GMAC TX delay = 0x1 on Cubietruck. In-Reply-To: <1427290745-26578-1-git-send-email-ian.campbell@citrix.com> References: <1427290745-26578-1-git-send-email-ian.campbell@citrix.com> Message-ID: <5513FB11.2010506@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 25-03-15 14:39, Ian Campbell wrote: > Of 4 boards in our automated test system 2 do not have reliable > networking with the default TX delay of 0x0. Increasing to 0x1 seems > to make things reliable on all 4 boards. > > Some previous ad-hpoc tests with tx delay set to 0, 1, 2 and 3 on one > of the problematic boards showed: > > 0: mw.l 0x1c20164 0x006 1 -- t/o in 4/5 tftp runs > 1: mw.l 0x1c20164 0x406 1 -- t/o in 1/5 tftp runs > 2: mw.l 0x1c20164 0x806 1 -- t/o in 1/5 tftp runs > 3: mw.l 0x1c20164 0xc06 1 -- t/o many times in first tftp run > > For 0, 1 and 2 "t/o" means one or two "T" glitches in the download, > but it did complete. For 3 those were basically continuous and it > couldn't complete. > > tftp was of a 16M initrd. > > Signed-off-by: Ian Campbell Thanks, I've merged this into u-boot-sunxi/master and added this in a small fixed pull-req which I've just send. Regards, Hans > --- > NB, Unlike the normal typo I actually mean to use my citrix address > here, since this was done for/at work. > > Actual testing was done on v2014.10 with the same direct write hack as > BananaPi had in that release (but with value == 1), I can't easily > upgrade the remove machines to something newer. The affect of this > patch is the same and has been tested on a local board, which didn't > have problems to start with however. > --- > configs/Cubietruck_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig > index 5c23bc7..fa48331 100644 > --- a/configs/Cubietruck_defconfig > +++ b/configs/Cubietruck_defconfig > @@ -1,6 +1,7 @@ > CONFIG_SPL=y > CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" > CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" > +CONFIG_GMAC_TX_DELAY=1 > CONFIG_VIDEO_VGA=y > CONFIG_ARM=y > CONFIG_ARCH_SUNXI=y >