[U-Boot] [PATCH 0/4] Add support for stm32f429-discovery board

[Kamil Lulko <rev13@wp.pl>]

On 25/03/15 17:58, Tom Rini wrote:
> On Wed, Mar 25, 2015 at 01:07:47PM +0900, Chanwoo Choi wrote:
>> Hi Kamil,
>>
>> I tested this patch-set in STM32 Discovery board. After applied this
>> patch-set on latest u-boot, I could not see the normal u-boot log. I
>> saw broken console log. I used the USART1 port (pa9, pa10 gpio pin).
>>
>> Could you give me a tip to resolve this issue?
> I bet this needs changes similar to b81bdf6 as that was a similar
> problem I believe.  In short, DM needs to be enabled now.
>
>> Best Regards,
>> Chanwoo Choi
>>
>> 2015? 3? 1? ???, Kamil Lulko<rev13@wp.pl>?? ??? ???:

I have tested this patch set again with 2015.04-rc4-gf643d92 and serial 
works without any problems.

Chanwoo, you mention STM32 Discovery board - this patch set supports 
only STM32F429 Discovery (it should work on SDRAM-less boards but not 
without modifications). Other than that the only thing I can think of is 
configuration of the UART<>USB converter.

Tom, does this mean changes are required for this patchset to be 
accepted? I have more things queued up (like moving some of SDRAM 
configuration bits out of the board code or LCD display support) but I 
would prefer to have some kind of assurance that this will not go into 
/dev/null eventually :)

/Kamil