* [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb
@ 2015-04-01 10:34 Lukasz Majewski
2015-04-01 10:34 ` [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device Lukasz Majewski
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Lukasz Majewski @ 2015-04-01 10:34 UTC (permalink / raw)
To: u-boot
This change allows using Image.itb image format with Exynos4 devices
(especially trats and trats2).
Such change facilitates automated testing since only one binary needs
to be prepared.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
include/configs/exynos4-common.h | 54 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h
index 41631c7..577afe7 100644
--- a/include/configs/exynos4-common.h
+++ b/include/configs/exynos4-common.h
@@ -66,4 +66,58 @@
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
+/* Common environment variables */
+#define CONFIG_EXTRA_ENV_ITB \
+ "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
+ "${kernelname}\0" \
+ "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
+ "${initrdname}\0" \
+ "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
+ "${fdtfile}\0" \
+ "check_ramdisk=" \
+ "if run loadinitrd; then " \
+ "setenv initrd_addr ${initrdaddr};" \
+ "else " \
+ "setenv initrd_addr -;" \
+ "fi;\0" \
+ "check_dtb=" \
+ "if run loaddtb; then " \
+ "setenv fdt_addr ${fdtaddr};" \
+ "else " \
+ "setenv fdt_addr;" \
+ "fi;\0" \
+ "kernel_args=" \
+ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart}" \
+ " ${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};\0" \
+ "boot_fit=" \
+ "setenv kerneladdr 0x42000000;" \
+ "setenv kernelname Image.itb;" \
+ "run loadkernel;" \
+ "run kernel_args;" \
+ "bootm ${kerneladdr}#${board_name}\0" \
+ "boot_uimg=" \
+ "setenv kerneladdr 0x40007FC0;" \
+ "setenv kernelname uImage;" \
+ "run check_dtb;" \
+ "run check_ramdisk;" \
+ "run loadkernel;" \
+ "run kernel_args;" \
+ "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+ "boot_zimg=" \
+ "setenv kerneladdr 0x40007FC0;" \
+ "setenv kernelname zImage;" \
+ "run check_dtb;" \
+ "run check_ramdisk;" \
+ "run loadkernel;" \
+ "run kernel_args;" \
+ "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+ "autoboot=" \
+ "if test -e mmc ${mmcdev}:${mmcbootpart} Image.itb; then; " \
+ "run boot_fit;" \
+ "elif test -e mmc ${mmcdev}:${mmcbootpart} zImage; then; " \
+ "run boot_zimg;" \
+ "elif test -e mmc ${mmcdev}:${mmcbootpart} uImage; then; " \
+ "run boot_uimg;" \
+ "fi;\0"
+
#endif /* __CONFIG_EXYNOS4_COMMON_H */
--
2.0.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device
2015-04-01 10:34 [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Lukasz Majewski
@ 2015-04-01 10:34 ` Lukasz Majewski
2015-04-06 6:30 ` Minkyu Kang
2015-04-01 10:34 ` [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device Lukasz Majewski
2015-04-06 6:30 ` [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Minkyu Kang
2 siblings, 1 reply; 6+ messages in thread
From: Lukasz Majewski @ 2015-04-01 10:34 UTC (permalink / raw)
To: u-boot
After this change it is possible to boot trats device with Image.itb,
which facilitates automated testing, since only one file is necessary.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
include/configs/trats.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/configs/trats.h b/include/configs/trats.h
index b21ea2d..6808e78 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -51,8 +51,10 @@
#define MACH_TYPE_TRATS 3928
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE
#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
+#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
@@ -106,7 +108,8 @@
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
- "params.bin raw 0x38 0x8\0"
+ "params.bin raw 0x38 0x8;" \
+ "/Image.itb ext4 0 2\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
@@ -172,6 +175,7 @@
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
+ CONFIG_EXTRA_ENV_ITB \
"fdtaddr=40800000\0" \
/* Falcon mode definitions */
--
2.0.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device
2015-04-01 10:34 [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Lukasz Majewski
2015-04-01 10:34 ` [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device Lukasz Majewski
@ 2015-04-01 10:34 ` Lukasz Majewski
2015-04-06 6:30 ` Minkyu Kang
2015-04-06 6:30 ` [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Minkyu Kang
2 siblings, 1 reply; 6+ messages in thread
From: Lukasz Majewski @ 2015-04-01 10:34 UTC (permalink / raw)
To: u-boot
After this change it is possible to boot trats2 device with Image.itb,
which facilitates automated testing, since only one file is necessary.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
---
include/configs/trats2.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 42481ab..94c31fb 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -44,8 +44,10 @@
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE
#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
+#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
@@ -96,7 +98,8 @@
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
- "params.bin raw 0x38 0x8\0"
+ "params.bin raw 0x38 0x8;" \
+ "/Image.itb ext4 0 2\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
@@ -153,6 +156,7 @@
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
+ CONFIG_EXTRA_ENV_ITB \
"fdtaddr=40800000\0" \
/* GPT */
--
2.0.0.rc2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb
2015-04-01 10:34 [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Lukasz Majewski
2015-04-01 10:34 ` [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device Lukasz Majewski
2015-04-01 10:34 ` [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device Lukasz Majewski
@ 2015-04-06 6:30 ` Minkyu Kang
2 siblings, 0 replies; 6+ messages in thread
From: Minkyu Kang @ 2015-04-06 6:30 UTC (permalink / raw)
To: u-boot
On 01/04/15 19:34, Lukasz Majewski wrote:
> This change allows using Image.itb image format with Exynos4 devices
> (especially trats and trats2).
> Such change facilitates automated testing since only one binary needs
> to be prepared.
>
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> ---
> include/configs/exynos4-common.h | 54 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device
2015-04-01 10:34 ` [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device Lukasz Majewski
@ 2015-04-06 6:30 ` Minkyu Kang
0 siblings, 0 replies; 6+ messages in thread
From: Minkyu Kang @ 2015-04-06 6:30 UTC (permalink / raw)
To: u-boot
On 01/04/15 19:34, Lukasz Majewski wrote:
> After this change it is possible to boot trats device with Image.itb,
> which facilitates automated testing, since only one file is necessary.
>
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> ---
> include/configs/trats.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device
2015-04-01 10:34 ` [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device Lukasz Majewski
@ 2015-04-06 6:30 ` Minkyu Kang
0 siblings, 0 replies; 6+ messages in thread
From: Minkyu Kang @ 2015-04-06 6:30 UTC (permalink / raw)
To: u-boot
On 01/04/15 19:34, Lukasz Majewski wrote:
> After this change it is possible to boot trats2 device with Image.itb,
> which facilitates automated testing, since only one file is necessary.
>
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> ---
> include/configs/trats2.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-04-06 6:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-01 10:34 [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Lukasz Majewski
2015-04-01 10:34 ` [U-Boot] [PATCH 2/3] config: exynos: trats: Enable support for Image.itb at trats device Lukasz Majewski
2015-04-06 6:30 ` Minkyu Kang
2015-04-01 10:34 ` [U-Boot] [PATCH 3/3] config: exynos: trats2: Enable support for Image.itb at trats2 device Lukasz Majewski
2015-04-06 6:30 ` Minkyu Kang
2015-04-06 6:30 ` [U-Boot] [PATCH 1/3] config: exynos: common: Provide env variables to support Image.itb Minkyu Kang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox