From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 07 Apr 2015 07:20:22 +0200 Subject: [U-Boot] [PATCH 1/2] i2c: mvtwsi: Support for up to 4 different controllers In-Reply-To: <551FD56E.1070708@redhat.com> References: <1428146826-24078-1-git-send-email-contact@paulk.fr> <1428146826-24078-2-git-send-email-contact@paulk.fr> <551FD56E.1070708@redhat.com> Message-ID: <55236916.5080900@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Hans, Am 04.04.2015 14:13, schrieb Hans de Goede: > Hi, > > On 04-04-15 13:27, Paul Kocialkowski wrote: >> Orion5x, Kirkwood and Armada XP platforms come with a single TWSI (I2C) MVTWSI >> controller. However, other platforms using MVTWSI may come with more: this is >> the case on Allwinner (sunxi) platforms, where up to 4 controllers can be found >> on the same chip. >> >> Signed-off-by: Paul Kocialkowski > > Looks good to me: > > Acked-by: Hans de Goede > > Heiko can you pick this one up please ? The second patch will likely > cause conflicts in the sunxi tree so I will pack that one up once > you've merged the first one, also I've some review remarks for the > second patch so that needs to be respun. No need to wait for me, please pick up the hole series. I look through the patch, and send my comments (now for v3). Then you can pick up this patches through your sunxi tree. bye, Heiko > > Regards, > > Hans > > > > >> --- >> arch/arm/include/asm/arch-sunxi/i2c.h | 2 +- >> arch/arm/mach-kirkwood/include/mach/config.h | 2 +- >> drivers/i2c/mvtwsi.c | 124 ++++++++++++++++++++------- >> include/configs/db-mv784mp-gp.h | 2 +- >> include/configs/edminiv2.h | 2 +- >> include/configs/maxbcm.h | 2 +- >> 6 files changed, 100 insertions(+), 34 deletions(-) >> >> diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h >> index dc5406b..502e3c6 100644 >> --- a/arch/arm/include/asm/arch-sunxi/i2c.h >> +++ b/arch/arm/include/asm/arch-sunxi/i2c.h >> @@ -8,7 +8,7 @@ >> >> #include >> >> -#define CONFIG_I2C_MVTWSI_BASE SUNXI_TWI0_BASE >> +#define CONFIG_I2C_MVTWSI_BASE0 SUNXI_TWI0_BASE >> /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */ >> #define CONFIG_SYS_TCLK 24000000 >> >> diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h >> index e77ac40..d049395 100644 >> --- a/arch/arm/mach-kirkwood/include/mach/config.h >> +++ b/arch/arm/mach-kirkwood/include/mach/config.h >> @@ -44,7 +44,7 @@ >> #define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 >> #define CONFIG_NR_DRAM_BANKS_MAX 2 >> >> -#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE >> +#define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE >> #define MV_UART_CONSOLE_BASE KW_UART0_BASE >> #define MV_SATA_BASE KW_SATA_BASE >> #define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET >> diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c >> index 6f6edd5..331d73c 100644 >> --- a/drivers/i2c/mvtwsi.c >> +++ b/drivers/i2c/mvtwsi.c >> @@ -14,7 +14,7 @@ >> #include >> >> /* >> - * include a file that will provide CONFIG_I2C_MVTWSI_BASE >> + * include a file that will provide CONFIG_I2C_MVTWSI_BASE* >> * and possibly other settings >> */ >> >> @@ -91,11 +91,37 @@ struct mvtwsi_registers { >> #define MVTWSI_STATUS_IDLE 0xF8 >> >> /* >> - * The single instance of the controller we'll be dealing with >> + * MVTWSI controller base >> */ >> >> -static struct mvtwsi_registers *twsi = >> - (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE; >> +static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap) >> +{ >> + switch (adap->hwadapnr) { >> + case 0: >> + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE0; >> +#ifdef CONFIG_I2C_MVTWSI_BASE1 >> + case 1: >> + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE1; >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE2 >> + case 2: >> + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE2; >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE3 >> + case 3: >> + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE3; >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE4 >> + case 4: >> + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE4; >> +#endif >> + default: >> + printf("Missing mvtwsi controller %d base\n", adap->hwadapnr); >> + break; >> + } >> + >> + return NULL; >> +} >> >> /* >> * Returned statuses are 0 for success and nonzero otherwise. >> @@ -117,8 +143,9 @@ static struct mvtwsi_registers *twsi = >> * Wait for IFLG to raise, or return 'timeout'; then if status is as expected, >> * return 0 (ok) or return 'wrong status'. >> */ >> -static int twsi_wait(int expected_status) >> +static int twsi_wait(struct i2c_adapter *adap, int expected_status) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> int control, status; >> int timeout = 1000; >> >> @@ -153,35 +180,40 @@ static u8 twsi_control_flags = MVTWSI_CONTROL_TWSIEN; >> * Assert the START condition, either in a single I2C transaction >> * or inside back-to-back ones (repeated starts). >> */ >> -static int twsi_start(int expected_status) >> +static int twsi_start(struct i2c_adapter *adap, int expected_status) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> + >> /* globally set TWSIEN in case it was not */ >> twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; >> /* assert START */ >> writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control); >> /* wait for controller to process START */ >> - return twsi_wait(expected_status); >> + return twsi_wait(adap, expected_status); >> } >> >> /* >> * Send a byte (i2c address or data). >> */ >> -static int twsi_send(u8 byte, int expected_status) >> +static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> + >> /* put byte in data register for sending */ >> writel(byte, &twsi->data); >> /* clear any pending interrupt -- that'll cause sending */ >> writel(twsi_control_flags, &twsi->control); >> /* wait for controller to receive byte and check ACK */ >> - return twsi_wait(expected_status); >> + return twsi_wait(adap, expected_status); >> } >> >> /* >> * Receive a byte. >> * Global mvtwsi_control_flags variable says if we should ack or nak. >> */ >> -static int twsi_recv(u8 *byte) >> +static int twsi_recv(struct i2c_adapter *adap, u8 *byte) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> int expected_status, status; >> >> /* compute expected status based on ACK bit in global control flags */ >> @@ -192,7 +224,7 @@ static int twsi_recv(u8 *byte) >> /* acknowledge *previous state* and launch receive */ >> writel(twsi_control_flags, &twsi->control); >> /* wait for controller to receive byte and assert ACK or NAK */ >> - status = twsi_wait(expected_status); >> + status = twsi_wait(adap, expected_status); >> /* if we did receive expected byte then store it */ >> if (status == 0) >> *byte = readl(&twsi->data); >> @@ -204,8 +236,9 @@ static int twsi_recv(u8 *byte) >> * Assert the STOP condition. >> * This is also used to force the bus back in idle (SDA=SCL=1). >> */ >> -static int twsi_stop(int status) >> +static int twsi_stop(struct i2c_adapter *adap, int status) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> int control, stop_status; >> int timeout = 1000; >> >> @@ -244,6 +277,7 @@ static unsigned int twsi_calc_freq(const int n, const int m) >> */ >> static void twsi_reset(struct i2c_adapter *adap) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> /* ensure controller will be enabled by any twsi*() function */ >> twsi_control_flags = MVTWSI_CONTROL_TWSIEN; >> /* reset controller */ >> @@ -259,6 +293,7 @@ static void twsi_reset(struct i2c_adapter *adap) >> static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, >> unsigned int requested_speed) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> unsigned int tmp_speed, highest_speed, n, m; >> unsigned int baud = 0x44; /* baudrate at controller reset */ >> >> @@ -281,6 +316,8 @@ static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, >> >> static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) >> { >> + struct mvtwsi_registers *twsi = twsi_get_base(adap); >> + >> /* reset controller */ >> twsi_reset(adap); >> /* set speed */ >> @@ -289,7 +326,7 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) >> writel(slaveadd, &twsi->slave_address); >> writel(0, &twsi->xtnd_slave_addr); >> /* assert STOP but don't care for the result */ >> - (void) twsi_stop(0); >> + (void) twsi_stop(adap, 0); >> } >> >> /* >> @@ -297,7 +334,8 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) >> * Common to i2c_probe, i2c_read and i2c_write. >> * Expected address status will derive from direction bit (bit 0) in addr. >> */ >> -static int i2c_begin(int expected_start_status, u8 addr) >> +static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, >> + u8 addr) >> { >> int status, expected_addr_status; >> >> @@ -307,10 +345,10 @@ static int i2c_begin(int expected_start_status, u8 addr) >> else /* writing */ >> expected_addr_status = MVTWSI_STATUS_ADDR_W_ACK; >> /* assert START */ >> - status = twsi_start(expected_start_status); >> + status = twsi_start(adap, expected_start_status); >> /* send out the address if the start went well */ >> if (status == 0) >> - status = twsi_send(addr, expected_addr_status); >> + status = twsi_send(adap, addr, expected_addr_status); >> /* return ok or status of first failure to caller */ >> return status; >> } >> @@ -325,12 +363,12 @@ static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip) >> int status; >> >> /* begin i2c read */ >> - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1) | 1); >> + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1); >> /* dummy read was accepted: receive byte but NAK it. */ >> if (status == 0) >> - status = twsi_recv(&dummy_byte); >> + status = twsi_recv(adap, &dummy_byte); >> /* Stop transaction */ >> - twsi_stop(0); >> + twsi_stop(adap, 0); >> /* return 0 or status of first failure */ >> return status; >> } >> @@ -351,15 +389,15 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, >> int status; >> >> /* begin i2c write to send the address bytes */ >> - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); >> + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); >> /* send addr bytes */ >> while ((status == 0) && alen--) >> - status = twsi_send(addr >> (8*alen), >> + status = twsi_send(adap, addr >> (8*alen), >> MVTWSI_STATUS_DATA_W_ACK); >> /* begin i2c read to receive eeprom data bytes */ >> if (status == 0) >> - status = i2c_begin( >> - MVTWSI_STATUS_REPEATED_START, (chip << 1) | 1); >> + status = i2c_begin(adap, MVTWSI_STATUS_REPEATED_START, >> + (chip << 1) | 1); >> /* prepare ACK if at least one byte must be received */ >> if (length > 0) >> twsi_control_flags |= MVTWSI_CONTROL_ACK; >> @@ -369,10 +407,10 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, >> if (length == 0) >> twsi_control_flags &= ~MVTWSI_CONTROL_ACK; >> /* read current byte */ >> - status = twsi_recv(data++); >> + status = twsi_recv(adap, data++); >> } >> /* Stop transaction */ >> - status = twsi_stop(status); >> + status = twsi_stop(adap, status); >> /* return 0 or status of first failure */ >> return status; >> } >> @@ -387,16 +425,16 @@ static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, >> int status; >> >> /* begin i2c write to send the eeprom adress bytes then data bytes */ >> - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); >> + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); >> /* send addr bytes */ >> while ((status == 0) && alen--) >> - status = twsi_send(addr >> (8*alen), >> + status = twsi_send(adap, addr >> (8*alen), >> MVTWSI_STATUS_DATA_W_ACK); >> /* send data bytes */ >> while ((status == 0) && (length-- > 0)) >> - status = twsi_send(*(data++), MVTWSI_STATUS_DATA_W_ACK); >> + status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK); >> /* Stop transaction */ >> - status = twsi_stop(status); >> + status = twsi_stop(adap, status); >> /* return 0 or status of first failure */ >> return status; >> } >> @@ -405,3 +443,31 @@ U_BOOT_I2C_ADAP_COMPLETE(twsi0, twsi_i2c_init, twsi_i2c_probe, >> twsi_i2c_read, twsi_i2c_write, >> twsi_i2c_set_bus_speed, >> CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0) >> +#ifdef CONFIG_I2C_MVTWSI_BASE1 >> +U_BOOT_I2C_ADAP_COMPLETE(twsi1, twsi_i2c_init, twsi_i2c_probe, >> + twsi_i2c_read, twsi_i2c_write, >> + twsi_i2c_set_bus_speed, >> + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 1) >> + >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE2 >> +U_BOOT_I2C_ADAP_COMPLETE(twsi2, twsi_i2c_init, twsi_i2c_probe, >> + twsi_i2c_read, twsi_i2c_write, >> + twsi_i2c_set_bus_speed, >> + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 2) >> + >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE3 >> +U_BOOT_I2C_ADAP_COMPLETE(twsi3, twsi_i2c_init, twsi_i2c_probe, >> + twsi_i2c_read, twsi_i2c_write, >> + twsi_i2c_set_bus_speed, >> + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 3) >> + >> +#endif >> +#ifdef CONFIG_I2C_MVTWSI_BASE4 >> +U_BOOT_I2C_ADAP_COMPLETE(twsi4, twsi_i2c_init, twsi_i2c_probe, >> + twsi_i2c_read, twsi_i2c_write, >> + twsi_i2c_set_bus_speed, >> + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 4) >> + >> +#endif >> diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h >> index 1683a15..4dd7b11 100644 >> --- a/include/configs/db-mv784mp-gp.h >> +++ b/include/configs/db-mv784mp-gp.h >> @@ -37,7 +37,7 @@ >> /* I2C */ >> #define CONFIG_SYS_I2C >> #define CONFIG_SYS_I2C_MVTWSI >> -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE >> +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE >> #define CONFIG_SYS_I2C_SLAVE 0x0 >> #define CONFIG_SYS_I2C_SPEED 100000 >> >> diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h >> index 5ce01fb..bd08740 100644 >> --- a/include/configs/edminiv2.h >> +++ b/include/configs/edminiv2.h >> @@ -208,7 +208,7 @@ >> #ifdef CONFIG_CMD_I2C >> #define CONFIG_SYS_I2C >> #define CONFIG_SYS_I2C_MVTWSI >> -#define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE >> +#define CONFIG_I2C_MVTWSI_BASE0 ORION5X_TWSI_BASE >> #define CONFIG_SYS_I2C_SLAVE 0x0 >> #define CONFIG_SYS_I2C_SPEED 100000 >> #endif >> diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h >> index 5999d60..e909623 100644 >> --- a/include/configs/maxbcm.h >> +++ b/include/configs/maxbcm.h >> @@ -35,7 +35,7 @@ >> /* I2C */ >> #define CONFIG_SYS_I2C >> #define CONFIG_SYS_I2C_MVTWSI >> -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE >> +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE >> #define CONFIG_SYS_I2C_SLAVE 0x0 >> #define CONFIG_SYS_I2C_SPEED 100000 >> >> > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany