From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 07 Apr 2015 07:24:31 +0200 Subject: [U-Boot] [PATCH v3 1/3] i2c: mvtwsi: Support for up to 4 different controllers In-Reply-To: <1428220288-3829-2-git-send-email-contact@paulk.fr> References: <1428220288-3829-1-git-send-email-contact@paulk.fr> <1428220288-3829-2-git-send-email-contact@paulk.fr> Message-ID: <55236A0F.1030700@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Paul, Am 05.04.2015 09:51, schrieb Paul Kocialkowski: > Orion5x, Kirkwood and Armada XP platforms come with a single TWSI (I2C) MVTWSI > controller. However, other platforms using MVTWSI may come with more: this is > the case on Allwinner (sunxi) platforms, where up to 4 controllers can be found > on the same chip. > > Signed-off-by: Paul Kocialkowski > --- > arch/arm/include/asm/arch-sunxi/i2c.h | 2 +- > arch/arm/mach-kirkwood/include/mach/config.h | 2 +- > drivers/i2c/mvtwsi.c | 124 ++++++++++++++++++++------- > include/configs/db-mv784mp-gp.h | 2 +- > include/configs/edminiv2.h | 2 +- > include/configs/maxbcm.h | 2 +- > 6 files changed, 100 insertions(+), 34 deletions(-) Thanks for your work. No comments from me, beside of the fact, that it would be nice if we could switch to use DM ;-) Acked-by: Heiko Schocher @Hans: please pick up the hole series, thanks! bye, Heiko > > diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h > index dc5406b..502e3c6 100644 > --- a/arch/arm/include/asm/arch-sunxi/i2c.h > +++ b/arch/arm/include/asm/arch-sunxi/i2c.h > @@ -8,7 +8,7 @@ > > #include > > -#define CONFIG_I2C_MVTWSI_BASE SUNXI_TWI0_BASE > +#define CONFIG_I2C_MVTWSI_BASE0 SUNXI_TWI0_BASE > /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */ > #define CONFIG_SYS_TCLK 24000000 > > diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h > index e77ac40..d049395 100644 > --- a/arch/arm/mach-kirkwood/include/mach/config.h > +++ b/arch/arm/mach-kirkwood/include/mach/config.h > @@ -44,7 +44,7 @@ > #define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 > #define CONFIG_NR_DRAM_BANKS_MAX 2 > > -#define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE > +#define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE > #define MV_UART_CONSOLE_BASE KW_UART0_BASE > #define MV_SATA_BASE KW_SATA_BASE > #define MV_SATA_PORT0_OFFSET KW_SATA_PORT0_OFFSET > diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c > index 6f6edd5..331d73c 100644 > --- a/drivers/i2c/mvtwsi.c > +++ b/drivers/i2c/mvtwsi.c > @@ -14,7 +14,7 @@ > #include > > /* > - * include a file that will provide CONFIG_I2C_MVTWSI_BASE > + * include a file that will provide CONFIG_I2C_MVTWSI_BASE* > * and possibly other settings > */ > > @@ -91,11 +91,37 @@ struct mvtwsi_registers { > #define MVTWSI_STATUS_IDLE 0xF8 > > /* > - * The single instance of the controller we'll be dealing with > + * MVTWSI controller base > */ > > -static struct mvtwsi_registers *twsi = > - (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE; > +static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap) > +{ > + switch (adap->hwadapnr) { > + case 0: > + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE0; > +#ifdef CONFIG_I2C_MVTWSI_BASE1 > + case 1: > + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE1; > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE2 > + case 2: > + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE2; > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE3 > + case 3: > + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE3; > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE4 > + case 4: > + return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE4; > +#endif > + default: > + printf("Missing mvtwsi controller %d base\n", adap->hwadapnr); > + break; > + } > + > + return NULL; > +} > > /* > * Returned statuses are 0 for success and nonzero otherwise. > @@ -117,8 +143,9 @@ static struct mvtwsi_registers *twsi = > * Wait for IFLG to raise, or return 'timeout'; then if status is as expected, > * return 0 (ok) or return 'wrong status'. > */ > -static int twsi_wait(int expected_status) > +static int twsi_wait(struct i2c_adapter *adap, int expected_status) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > int control, status; > int timeout = 1000; > > @@ -153,35 +180,40 @@ static u8 twsi_control_flags = MVTWSI_CONTROL_TWSIEN; > * Assert the START condition, either in a single I2C transaction > * or inside back-to-back ones (repeated starts). > */ > -static int twsi_start(int expected_status) > +static int twsi_start(struct i2c_adapter *adap, int expected_status) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > + > /* globally set TWSIEN in case it was not */ > twsi_control_flags |= MVTWSI_CONTROL_TWSIEN; > /* assert START */ > writel(twsi_control_flags | MVTWSI_CONTROL_START, &twsi->control); > /* wait for controller to process START */ > - return twsi_wait(expected_status); > + return twsi_wait(adap, expected_status); > } > > /* > * Send a byte (i2c address or data). > */ > -static int twsi_send(u8 byte, int expected_status) > +static int twsi_send(struct i2c_adapter *adap, u8 byte, int expected_status) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > + > /* put byte in data register for sending */ > writel(byte, &twsi->data); > /* clear any pending interrupt -- that'll cause sending */ > writel(twsi_control_flags, &twsi->control); > /* wait for controller to receive byte and check ACK */ > - return twsi_wait(expected_status); > + return twsi_wait(adap, expected_status); > } > > /* > * Receive a byte. > * Global mvtwsi_control_flags variable says if we should ack or nak. > */ > -static int twsi_recv(u8 *byte) > +static int twsi_recv(struct i2c_adapter *adap, u8 *byte) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > int expected_status, status; > > /* compute expected status based on ACK bit in global control flags */ > @@ -192,7 +224,7 @@ static int twsi_recv(u8 *byte) > /* acknowledge *previous state* and launch receive */ > writel(twsi_control_flags, &twsi->control); > /* wait for controller to receive byte and assert ACK or NAK */ > - status = twsi_wait(expected_status); > + status = twsi_wait(adap, expected_status); > /* if we did receive expected byte then store it */ > if (status == 0) > *byte = readl(&twsi->data); > @@ -204,8 +236,9 @@ static int twsi_recv(u8 *byte) > * Assert the STOP condition. > * This is also used to force the bus back in idle (SDA=SCL=1). > */ > -static int twsi_stop(int status) > +static int twsi_stop(struct i2c_adapter *adap, int status) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > int control, stop_status; > int timeout = 1000; > > @@ -244,6 +277,7 @@ static unsigned int twsi_calc_freq(const int n, const int m) > */ > static void twsi_reset(struct i2c_adapter *adap) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > /* ensure controller will be enabled by any twsi*() function */ > twsi_control_flags = MVTWSI_CONTROL_TWSIEN; > /* reset controller */ > @@ -259,6 +293,7 @@ static void twsi_reset(struct i2c_adapter *adap) > static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, > unsigned int requested_speed) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > unsigned int tmp_speed, highest_speed, n, m; > unsigned int baud = 0x44; /* baudrate at controller reset */ > > @@ -281,6 +316,8 @@ static unsigned int twsi_i2c_set_bus_speed(struct i2c_adapter *adap, > > static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) > { > + struct mvtwsi_registers *twsi = twsi_get_base(adap); > + > /* reset controller */ > twsi_reset(adap); > /* set speed */ > @@ -289,7 +326,7 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) > writel(slaveadd, &twsi->slave_address); > writel(0, &twsi->xtnd_slave_addr); > /* assert STOP but don't care for the result */ > - (void) twsi_stop(0); > + (void) twsi_stop(adap, 0); > } > > /* > @@ -297,7 +334,8 @@ static void twsi_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) > * Common to i2c_probe, i2c_read and i2c_write. > * Expected address status will derive from direction bit (bit 0) in addr. > */ > -static int i2c_begin(int expected_start_status, u8 addr) > +static int i2c_begin(struct i2c_adapter *adap, int expected_start_status, > + u8 addr) > { > int status, expected_addr_status; > > @@ -307,10 +345,10 @@ static int i2c_begin(int expected_start_status, u8 addr) > else /* writing */ > expected_addr_status = MVTWSI_STATUS_ADDR_W_ACK; > /* assert START */ > - status = twsi_start(expected_start_status); > + status = twsi_start(adap, expected_start_status); > /* send out the address if the start went well */ > if (status == 0) > - status = twsi_send(addr, expected_addr_status); > + status = twsi_send(adap, addr, expected_addr_status); > /* return ok or status of first failure to caller */ > return status; > } > @@ -325,12 +363,12 @@ static int twsi_i2c_probe(struct i2c_adapter *adap, uchar chip) > int status; > > /* begin i2c read */ > - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1) | 1); > + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1) | 1); > /* dummy read was accepted: receive byte but NAK it. */ > if (status == 0) > - status = twsi_recv(&dummy_byte); > + status = twsi_recv(adap, &dummy_byte); > /* Stop transaction */ > - twsi_stop(0); > + twsi_stop(adap, 0); > /* return 0 or status of first failure */ > return status; > } > @@ -351,15 +389,15 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, > int status; > > /* begin i2c write to send the address bytes */ > - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); > + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); > /* send addr bytes */ > while ((status == 0) && alen--) > - status = twsi_send(addr >> (8*alen), > + status = twsi_send(adap, addr >> (8*alen), > MVTWSI_STATUS_DATA_W_ACK); > /* begin i2c read to receive eeprom data bytes */ > if (status == 0) > - status = i2c_begin( > - MVTWSI_STATUS_REPEATED_START, (chip << 1) | 1); > + status = i2c_begin(adap, MVTWSI_STATUS_REPEATED_START, > + (chip << 1) | 1); > /* prepare ACK if at least one byte must be received */ > if (length > 0) > twsi_control_flags |= MVTWSI_CONTROL_ACK; > @@ -369,10 +407,10 @@ static int twsi_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, > if (length == 0) > twsi_control_flags &= ~MVTWSI_CONTROL_ACK; > /* read current byte */ > - status = twsi_recv(data++); > + status = twsi_recv(adap, data++); > } > /* Stop transaction */ > - status = twsi_stop(status); > + status = twsi_stop(adap, status); > /* return 0 or status of first failure */ > return status; > } > @@ -387,16 +425,16 @@ static int twsi_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, > int status; > > /* begin i2c write to send the eeprom adress bytes then data bytes */ > - status = i2c_begin(MVTWSI_STATUS_START, (chip << 1)); > + status = i2c_begin(adap, MVTWSI_STATUS_START, (chip << 1)); > /* send addr bytes */ > while ((status == 0) && alen--) > - status = twsi_send(addr >> (8*alen), > + status = twsi_send(adap, addr >> (8*alen), > MVTWSI_STATUS_DATA_W_ACK); > /* send data bytes */ > while ((status == 0) && (length-- > 0)) > - status = twsi_send(*(data++), MVTWSI_STATUS_DATA_W_ACK); > + status = twsi_send(adap, *(data++), MVTWSI_STATUS_DATA_W_ACK); > /* Stop transaction */ > - status = twsi_stop(status); > + status = twsi_stop(adap, status); > /* return 0 or status of first failure */ > return status; > } > @@ -405,3 +443,31 @@ U_BOOT_I2C_ADAP_COMPLETE(twsi0, twsi_i2c_init, twsi_i2c_probe, > twsi_i2c_read, twsi_i2c_write, > twsi_i2c_set_bus_speed, > CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0) > +#ifdef CONFIG_I2C_MVTWSI_BASE1 > +U_BOOT_I2C_ADAP_COMPLETE(twsi1, twsi_i2c_init, twsi_i2c_probe, > + twsi_i2c_read, twsi_i2c_write, > + twsi_i2c_set_bus_speed, > + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 1) > + > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE2 > +U_BOOT_I2C_ADAP_COMPLETE(twsi2, twsi_i2c_init, twsi_i2c_probe, > + twsi_i2c_read, twsi_i2c_write, > + twsi_i2c_set_bus_speed, > + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 2) > + > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE3 > +U_BOOT_I2C_ADAP_COMPLETE(twsi3, twsi_i2c_init, twsi_i2c_probe, > + twsi_i2c_read, twsi_i2c_write, > + twsi_i2c_set_bus_speed, > + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 3) > + > +#endif > +#ifdef CONFIG_I2C_MVTWSI_BASE4 > +U_BOOT_I2C_ADAP_COMPLETE(twsi4, twsi_i2c_init, twsi_i2c_probe, > + twsi_i2c_read, twsi_i2c_write, > + twsi_i2c_set_bus_speed, > + CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 4) > + > +#endif > diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h > index 1683a15..4dd7b11 100644 > --- a/include/configs/db-mv784mp-gp.h > +++ b/include/configs/db-mv784mp-gp.h > @@ -37,7 +37,7 @@ > /* I2C */ > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MVTWSI > -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE > +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE > #define CONFIG_SYS_I2C_SLAVE 0x0 > #define CONFIG_SYS_I2C_SPEED 100000 > > diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h > index 5ce01fb..bd08740 100644 > --- a/include/configs/edminiv2.h > +++ b/include/configs/edminiv2.h > @@ -208,7 +208,7 @@ > #ifdef CONFIG_CMD_I2C > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MVTWSI > -#define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE > +#define CONFIG_I2C_MVTWSI_BASE0 ORION5X_TWSI_BASE > #define CONFIG_SYS_I2C_SLAVE 0x0 > #define CONFIG_SYS_I2C_SPEED 100000 > #endif > diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h > index 5999d60..e909623 100644 > --- a/include/configs/maxbcm.h > +++ b/include/configs/maxbcm.h > @@ -35,7 +35,7 @@ > /* I2C */ > #define CONFIG_SYS_I2C > #define CONFIG_SYS_I2C_MVTWSI > -#define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE > +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE > #define CONFIG_SYS_I2C_SLAVE 0x0 > #define CONFIG_SYS_I2C_SPEED 100000 > > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany