[U-Boot] [PATCH v5 00/14] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix

[Jan Kiszka <jan.kiszka@siemens.com>]

On 2015-04-08 15:43, Tom Rini wrote:
> On Wed, Apr 08, 2015 at 10:37:40AM +0200, Jan Kiszka wrote:
>> On 2015-03-19 16:02, Thierry Reding wrote:
>>> On Mon, Mar 09, 2015 at 08:00:10AM +0100, Jan Kiszka wrote:
>>>> Changes in v4:
>>>>  - rebased over master
>>>>  - implemented psci_get_cpu_id as weak function
>>>>  - implemented psci_disable/enable_smp as weak functions
>>>>  - adjusted register interface of psci_get_cpu_stack_top
>>>>
>>>> This version (+ the non-cached memory init fix) can also be found at
>>>> https://github.com/siemens/u-boot/tree/jetson-tk1-v5.
>>>>
>>>> Jan
>>>>
>>>> CC: Ian Campbell <ijc@hellion.org.uk>
>>>> CC: Marc Zyngier <marc.zyngier@arm.com>
>>>>
>>>> Ian Campbell (3):
>>>>   tegra124: Add more registers to struct mc_ctlr
>>>>   jetson-tk1: Add PSCI configuration options and reserve secure code
>>>>   tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0
>>>>
>>>> Jan Kiszka (11):
>>>>   sun7i: Remove duplicate call to psci_arch_init
>>>>   ARM: Factor out common psci_get_cpu_id
>>>>   ARM: Factor out reusable psci_cpu_off_common
>>>>   ARM: Factor out reusable psci_cpu_entry
>>>>   ARM: Factor out reusable psci_get_cpu_stack_top
>>>>   ARM: Put target PC for PSCI CPU_ON on per-CPU stack
>>>>   virt-dt: Allow reservation of secure region when in a RAM carveout
>>>>   tegra: Make tegra_powergate_power_on public
>>>>   tegra: Add ap_pm_init hook
>>>>   tegra124: Add PSCI support for Tegra124
>>>>   tegra: Set CNTFRQ for secondary CPUs
>>>>
>>>>  arch/arm/cpu/armv7/psci.S                   | 121 ++++++++++++++++++++++++++++
>>>>  arch/arm/cpu/armv7/sunxi/psci.S             | 112 ++++---------------------
>>>>  arch/arm/cpu/armv7/virt-dt.c                |  29 +++++++
>>>>  arch/arm/cpu/armv7/virt-v7.c                |   5 ++
>>>>  arch/arm/include/asm/arch-tegra/ap.h        |   5 ++
>>>>  arch/arm/include/asm/arch-tegra/powergate.h |   1 +
>>>>  arch/arm/include/asm/arch-tegra124/flow.h   |   6 ++
>>>>  arch/arm/include/asm/arch-tegra124/mc.h     |  35 +++++++-
>>>>  arch/arm/include/asm/armv7.h                |   1 +
>>>>  arch/arm/include/asm/system.h               |   1 +
>>>>  arch/arm/lib/bootm-fdt.c                    |   5 ++
>>>>  arch/arm/mach-tegra/Makefile                |   4 +
>>>>  arch/arm/mach-tegra/ap.c                    |  15 ++++
>>>>  arch/arm/mach-tegra/powergate.c             |   2 +-
>>>>  arch/arm/mach-tegra/psci.S                  | 114 ++++++++++++++++++++++++++
>>>>  arch/arm/mach-tegra/tegra124/Kconfig        |   2 +
>>>>  arch/arm/mach-tegra/tegra124/Makefile       |   4 +
>>>>  arch/arm/mach-tegra/tegra124/ap.c           |  55 +++++++++++++
>>>>  board/nvidia/common/board.c                 |   4 +
>>>>  include/configs/jetson-tk1.h                |   5 ++
>>>>  20 files changed, 428 insertions(+), 98 deletions(-)
>>>>  create mode 100644 arch/arm/mach-tegra/psci.S
>>>>  create mode 100644 arch/arm/mach-tegra/tegra124/ap.c
>>>
>>> For the series:
>>>
>>> Reviewed-by: Thierry Reding <treding@nvidia.com>
>>> Tested-by: Thierry Reding <treding@nvidia.com>
>>
>> Thanks for all feedback - what's next? Anything missing? Should I rebase
>> (didn't check yet if that is necessary) and resend?
> 
> Please rebase (it doesn't apply cleanly) and throw Reviewed/Tested-by's
> into the commit messages and then I'll apply, thanks!
> 

Base on master (there it applies fine but causes a trivial build
warning) or some other tree?

Jan

-- 
Siemens AG, Corporate Technology, CT RTC ITP SES-DE
Corporate Competence Center Embedded Linux