From: Angelo Dureghello <angelo@sysam.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/7] m68k: remove arch/m68k/lib/board.c
Date: Wed, 08 Apr 2015 21:20:55 +0200 [thread overview]
Message-ID: <55257F97.5020502@sysam.it> (raw)
In-Reply-To: <CAK7LNAQvkvE6aQ-vLCXhvVSd72X-cd-PZxA9f66bzDW-+X1K_Q@mail.gmail.com>
Hi Masahiro and all,
On 25/03/2015 04:20, Masahiro Yamada wrote:
> Hi Angelo,
>
>
> 2015-03-17 15:55 GMT+09:00 Angelo Dureghello <angelo@sysam.it>:
>> On 17/03/2015 04:35, Masahiro Yamada wrote:
>>>
>>> All the M68000 boards have switched to Generic Board.
>>> This file is no longer necessary.
>>>
>>
>> Hi Masahiro,
>>
>> thanks.
>>
>> Afaik, me and Alison converted and tested actually only 2 boards
>> (adding #define CONFIG_SYS_GENERIC_BOARD inside /include/configs/...)
>>
>> Is this a problem ? Afaik, the user going to build the board
>> will get a warning that he needs to switch to generic board.
>> So the same user will be the tester that all works. Correct ?
>
> As a rule of generic board, people are supposed to do run-test
> and then send a patch.
>
>
> BTW, M68K is the last architecture that adopts per-board linker script.
>
> M68K should switch to per-soc linker scripts like the other architecures.
> It means all the followings should be merged into the single linker script
> arch/m68k/cpu/u-boot.lds.
>
> board/freescale/m52277evb/u-boot.lds
> board/freescale/m5235evb/u-boot.lds
> board/cobra5272/u-boot.lds
> board/BuS/eb_cpu5282/u-boot.lds
> board/freescale/m5208evbe/u-boot.lds
> board/freescale/m5249evb/u-boot.lds
> board/freescale/m5253demo/u-boot.lds
> board/freescale/m5272c3/u-boot.lds
> board/freescale/m5275evb/u-boot.lds
> board/freescale/m5282evb/u-boot.lds
> board/sysam/amcore/u-boot.lds
> board/astro/mcf5373l/u-boot.lds
> board/freescale/m53017evb/u-boot.lds
> board/freescale/m5329evb/u-boot.lds
> board/freescale/m5373evb/u-boot.lds
> board/freescale/m54418twr/u-boot.lds
> board/freescale/m54451evb/u-boot.lds
> board/freescale/m54455evb/u-boot.lds
> board/freescale/m547xevb/u-boot.lds
> board/freescale/m548xevb/u-boot.lds
>
>
>
> Is this possible for you? (or for someone else?)
>
> If there is no volunteer, it would be much easier to remove all the M68K boards
> except the two you and Alison can maintain.
>
> Maintain or Remove!
>
so i posted a patch for a unified m68k arch-wide linker script.
Could not be the best solution but it is a solution that works.
https://patchwork.ozlabs.org/patch/455952/
Let me know your comments.
Best regards,
Angelo Dureghello
--
next prev parent reply other threads:[~2015-04-08 19:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-17 3:35 [U-Boot] [PATCH v2 0/7] Some improvements related to build system Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 1/7] generic-board: move __HAVE_ARCH_GENERIC_BOARD to Kconfig Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 2/7] generic-board: select SYS_GENERIC_BOARD for some architectures Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 3/7] m68k: remove arch/m68k/lib/board.c Masahiro Yamada
2015-03-17 6:55 ` Angelo Dureghello
2015-03-25 3:20 ` Masahiro Yamada
2015-03-25 12:12 ` Angelo Dureghello
2015-04-08 19:20 ` Angelo Dureghello [this message]
2015-04-09 10:07 ` Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 4/7] malloc_f: remove redundant defalut values of CONFIG_SYS_MALLOC_F_LEN Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 5/7] malloc_f: enable SYS_MALLOC_F by default if DM is on Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 6/7] ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x Masahiro Yamada
2015-03-17 3:35 ` [U-Boot] [PATCH v2 7/7] ARM: bcm283x: move SoC headers to mach-bcm283x/include/mach Masahiro Yamada
2015-03-19 10:36 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55257F97.5020502@sysam.it \
--to=angelo@sysam.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox