From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Wed, 15 Apr 2015 16:37:13 +0200 Subject: [U-Boot] [PATCH v5 0/2] i2c: sunxi: Support every i2c controller on each supported platform In-Reply-To: <1428700192-17784-1-git-send-email-contact@paulk.fr> References: <1428700192-17784-1-git-send-email-contact@paulk.fr> Message-ID: <552E7799.1080004@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 10-04-15 23:09, Paul Kocialkowski wrote: > Changes since v4: > * Got rid of Kconfig after all > * Only build mvtwsi when at least one controller is enabled on sunxi > * Controller 0 doesn't have to be enabled in particular > > Changes since v3: > * Kconfig support for MVTWSI > * Only enable twsi0 by default for platforms that always use it for the AXP > * Remove enabling other I2C busses by default on boards that expose them on pin > headers since those might be used for some other functionalities > > Changes since v2: > * I2C/TWI busses enable for Cubietruck as well > > Changes since v1: > * Kconfig option to enable I2C/TWI controllers 1-4 (when applicable) > * Following patch to enable exposed busses on a few community-supported > single-board-computers > > This series adds support for every i2c controller found on > sun4i/sun5i/sun6i/sun7i/sun8i platforms and shouldn't break support for Marvell > platforms (orion5x, kirkwood, armada xp) the driver was originally written for. > > Regarding sunxi, I double-checked that this doesn't conflict with > VIDEO_LCD_PANEL_I2C. > > I would be interested in having this tested on sun8i (A23), since I changed TWI0 > muxing (to PH2-PH3 instead of PB0-PB1), according to the user manual and what > is being done on the upstream Linux kernel. I2C was either not working before, > or it was being muxed correctly by the bootrom, probably to communicate with the > AXP, which luckily made it work in U-Boot too, since the I/O base address was > already correct. > > My use case here is that I'm writing a slave-side bitbang i2c implementation > (with an Arduino) for a school project, using a Cubieboard2 as master and > U-Boot as POC. However, only TWI1 was available through the expansion pins, > hence the need for this series. > Thanks, merged into u-boot-sunxi/next with Heiko's ack for the first patch, Regards, Hans