[U-Boot] Please pull u-boot-sunxi master

[Hans de Goede <hdegoede@redhat.com>]

Hi Tom,

Please pull u-boot-sunxi/master into master for the first series of sunxi
patches for v2015.07. This consists of a mix of bug-fixes, improvements
and new boards.

The following changes since commit f33cdaa4c3da4a8fd35aa2f9a3172f31cc887b35:

   Prepare v2015.04 (2015-04-13 10:53:03 -0400)

are available in the git repository at:

   http://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to 6c739c5d8a3466f8ef2f8543636484957bcca6ee:

   sunxi: Complete i2c support for each supported platform (2015-04-15 16:33:17 +0200)

----------------------------------------------------------------
Han Pengfei (1):
       sun6i: Add support for the Mixtile LOFT-Q board

Hans de Goede (3):
       sunxi: usbc: Initialize vusb value on request_resources
       sunxi: usbc: Wait for vbus to fall after disabling it
       sunxi: axp221: Use vbus-available rather then vbus-usable for vbus-detect

Paul Kocialkowski (26):
       sunxi: gpio: Indentation fix
       power: axp221: Virtual VBUS detect and enable GPIOs to replace separate logic
       sunxi: usb: Drop AXP-sepcific VBUS detection and drive logic
       power: axp209: VBUS detection support
       sunxi: common VBUS detection logic in usbc
       sunxi: USB download gadget cable detection
       sunxi: Ainol AW1 support
       sunxi: GPIO pin mux hardware-feature-specific function index defines
       sunxi: Complete mmc pin mux for each supported platform, configured with Kconfig
       sunxi: Yones Toptech BD1078 support
       power: axp152: Registers definitions in header
       power: axp209: Registers definitions in header
       sunxi: TZX-Q8-713B7 mmc0 card-detect pin
       sunxi: Ampe A76 mmc0 card-detect pin
       sunxi: Ainol AW1 mmc0 card-detect pin
       sunxi: Yones Toptech BD1078 mmc0 and mmc1 card-detect pins
       sunxi: A20-OLinuXino-Lime2 mmc0 card-detect pin
       sunxi: Cubieboard2 mmc0 card-detect pin
       sunxi: A20-OLinuXino-Lime2 USB0 VBUS detect and enable pins
       sunxi: Serial number support, obtained from SID bits
       sunxi: Removed dram files cleanup in MAINTAINERS
       sunxi: Proper iNet board config naming
       sunxi: iNet 3W support
       sunxi: iNet 3F support
       i2c: mvtwsi: Support for up to 4 different controllers
       sunxi: Complete i2c support for each supported platform

  arch/arm/cpu/armv7/sunxi/board.c                   |  29 ++-
  arch/arm/cpu/armv7/sunxi/rsb.c                     |   8 +-
  arch/arm/cpu/armv7/sunxi/usbc.c                    |  77 +++++--
  arch/arm/include/asm/arch-sunxi/cpu_sun4i.h        |   7 +
  arch/arm/include/asm/arch-sunxi/gpio.h             | 104 +++++----
  arch/arm/include/asm/arch-sunxi/i2c.h              |  17 +-
  arch/arm/include/asm/arch-sunxi/usbc.h             |   1 +
  arch/arm/mach-kirkwood/include/mach/config.h       |   2 +-
  board/sunxi/Kconfig                                |  58 ++++-
  board/sunxi/MAINTAINERS                            |  32 ++-
  board/sunxi/board.c                                | 254 +++++++++++++++++++--
  board/sunxi/gmac.c                                 |  22 +-
  configs/A20-OLinuXino-Lime2_defconfig              |   3 +
  configs/Ainol_AW1_defconfig                        |  22 ++
  configs/Ampe_A76_defconfig                         |   3 +-
  configs/Cubieboard2_defconfig                      |   1 +
  configs/Ippo_q8h_v1_2_defconfig                    |   4 +-
  configs/Ippo_q8h_v5_defconfig                      |   4 +-
  configs/TZX-Q8-713B7_defconfig                     |   1 +
  configs/Yones_Toptech_BD1078_defconfig             |  29 +++
  configs/iNet_3F_defconfig                          |  20 ++
  configs/iNet_3W_defconfig                          |  19 ++
  .../{Inet_86VS_defconfig => iNet_86VS_defconfig}   |   0
  configs/mixtile_loftq_defconfig                    |  21 ++
  drivers/gpio/sunxi_gpio.c                          |  23 ++
  drivers/i2c/mvtwsi.c                               | 128 ++++++++---
  drivers/net/sunxi_emac.c                           |   2 +-
  drivers/power/axp152.c                             |  11 -
  drivers/power/axp209.c                             |  46 +---
  drivers/power/axp221.c                             |  75 +++---
  drivers/usb/musb-new/sunxi.c                       |  45 +---
  drivers/video/sunxi_display.c                      |   8 +-
  include/axp152.h                                   |  12 +
  include/axp209.h                                   |  38 +++
  include/axp221.h                                   |  14 +-
  include/configs/db-mv784mp-gp.h                    |   2 +-
  include/configs/edminiv2.h                         |   2 +-
  include/configs/maxbcm.h                           |   2 +-
  include/configs/sunxi-common.h                     |   4 +
  39 files changed, 852 insertions(+), 298 deletions(-)
  create mode 100644 configs/Ainol_AW1_defconfig
  create mode 100644 configs/Yones_Toptech_BD1078_defconfig
  create mode 100644 configs/iNet_3F_defconfig
  create mode 100644 configs/iNet_3W_defconfig
  rename configs/{Inet_86VS_defconfig => iNet_86VS_defconfig} (100%)
  create mode 100644 configs/mixtile_loftq_defconfig

Regards,

Hans