[U-Boot] [PATCH] video, ipu: make ldb clock frequenz overwriteable through board code

[Eric Nelson <eric.nelson@boundarydevices.com>]

Hi Heiko,

On 04/12/2015 01:19 AM, Heiko Schocher wrote:
> the ldb clock can be setup in board code (for example set through PLL5).
> Update the ldb_clock rate also through board code.
> 
> This should be removed, if a clock framework is availiable.
> 
Any chance you're up to the task?

Searching for 'clk_get' in the sources shows a proliferation
of attempts for various SOCs and drivers.

> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> 
>  drivers/video/ipu.h        |  1 +
>  drivers/video/ipu_common.c | 11 +++++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/video/ipu.h b/drivers/video/ipu.h
> index 091b58f..f13934f 100644
> --- a/drivers/video/ipu.h
> +++ b/drivers/video/ipu.h
> @@ -266,4 +266,5 @@ void ipu_dp_uninit(ipu_channel_t channel);
>  void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap);
>  ipu_color_space_t format_to_colorspace(uint32_t fmt);
>  

I'd rather see this in imx-common/video.h to avoid #includes
out of the driver tree.

> +int ipu_set_ldb_clock(int rate);
>  #endif
> diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c
> index 1a209d4..dc054bc 100644
> --- a/drivers/video/ipu_common.c
> +++ b/drivers/video/ipu_common.c
> @@ -1198,3 +1198,14 @@ ipu_color_space_t format_to_colorspace(uint32_t fmt)
>  	}
>  	return RGB;
>  }
> +
> +/* should removed when clk framework is availiable */
> +int ipu_set_ldb_clock(int rate)
> +{

This forces a tight dependency on when this is called that
using ldb_clk directly would prevent.

> +	if (g_ldb_clk == NULL)
> +		return -ENOENT;
> +
> +	g_ldb_clk->rate = rate;
> +
> +	return 0;
> +}
> 

The use of g_ldb_clk seems pretty dodgy everywhere in the
IPU driver.

Otherwise:

Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>